Lab Techniques protocols

Plate readers, calibration, dilutions, QC and good laboratory practice.

167 protocols

Lab Techniques

5 Whys Basics

The 5 Whys technique follows a problem down a chain of causes by asking why repeatedly until the answer points to a fixable system weakness. This entry shows running a disciplined chain, checking each link with evidence, and knowing when the problem needs a broader method instead.

45 minutes · Beginner
Lab Techniques

Absorbance Assay Quality Control

Controls tell you whether to trust a plate before you interpret a single unknown. This entry sets out blank, positive, and negative controls, replicate checks, simple acceptance limits, and a heatmap review that catches pipetting and edge problems early Keep the decision record with the data.

1 hour · Intermediate
Lab Techniques

Anemometer Calibration Overview

Anemometers support fume hood, cleanroom and ventilation checks where airflow protects people and product. This overview explains comparison against a reference in a controlled airstream, positioning consistency, testing across the working range, and documenting corrections so routine face-velocity surveys stay comparable between operators, instruments and scheduled checks.

1.5 hours · Intermediate
Lab Techniques

Archive Retrieval Testing

Archives only help if records can be found and read years later. This guide covers selecting retrieval samples across media and age, timing the search, checking readability and completeness, logging difficulties, and fixing indexing or media problems while the knowledge to correct them still exists locally.

1.5 hours · Beginner
Lab Techniques

As-Found and As-Left Data

As-found results show how an instrument performed during use, while as-left results confirm its state after adjustment. This entry explains why both data sets matter, how to record them, what a shift between them triggers, and how to trend the values across successive calibrations.

1 hour · Intermediate
Lab Techniques

Assay Control Charting

Control charting turns repeated control results into an early warning system for drift, shifts, and rising variability. This entry covers choosing stable controls, establishing a baseline honestly, plotting results run by run, and acting on patterns early instead of waiting for outright control failures.

2 hours · Intermediate
Lab Techniques

Asset Labelling

A durable, unique label connects the physical item to its records in seconds. This entry covers choosing label content and material for laboratory conditions, placing labels consistently, handling small items, replacing damaged labels without breaking traceability, and reconciling labels against the register during periodic checks.

1 hour · Beginner
Lab Techniques

Audit Trail Review Process

Audit trail review checks the computerised history of creations, changes, and deletions around important results before those results are trusted. This entry covers scoping review by risk, reading trails around reported values, questioning unusual patterns, and documenting the review so it is evidence rather than ceremony.

2 hours · Intermediate
Lab Techniques

Backup and Restore Testing

A backup only counts when a restore proves the data come back complete and usable. This entry covers scoping what to protect, scheduling and monitoring jobs, performing documented test restores, verifying content rather than job success messages, and fixing gaps before an incident tests the system for real.

3 hours · Intermediate
Lab Techniques

Balance Daily Check and Calibration Awareness

A quick daily balance check catches drift, damage, or a dirty pan before inaccurate weighing spoils preparations. This entry covers warm-up, levelling, internal adjustment where fitted, check weights across the used range, recording results, and knowing when to stop and call for service.

20 minutes · Beginner
Lab Techniques

Biological Waste Disposal

Biological waste ranges from gloves and plates to sharps and liquid cultures, each needing a matched route. This entry outlines segregation at source, container choice, decontamination awareness, labelling, and collection habits at a general level. Agent and institutional requirements govern final treatment, so confirm classifications before generating new waste.

45 minutes · Beginner
Lab Techniques

Biosafety Cabinet Airflow Certification Overview

Biological safety cabinets protect people, samples, and the room only when airflow and filters work as designed. This overview explains what professional certification checks, how to prepare the cabinet and lab, what users should observe, and which faults mean stopping work immediately.

1 hour · Intermediate
Lab Techniques

Calibration Certificate Review

Receiving a certificate is not the same as accepting it. This entry explains checking identity and traceability details, comparing as-found results with tolerances, confirming the calibration covers your working range, spotting limitations or adjustments, and recording an explicit accept or reject decision with follow-up.

1 hour · Intermediate
Lab Techniques

Calibration Hierarchy

A calibration hierarchy arranges references from national standards down through laboratory references to working instruments, each level calibrated against the one above. This overview explains why levels exist, how uncertainty grows down the chain, and how to document links so routine checks remain defensible during review.

1 hour · Intermediate
Lab Techniques

CAPA Basics Overview

Corrective and preventive action turns a single problem into a lasting fix. This overview walks through defining the issue, finding root cause, choosing proportionate actions, checking effectiveness, and documenting closure so the same failure is less likely to return in future work.

1 hour · Intermediate
Lab Techniques

Centrifuge Aerosol Safety

Spinning infectious or hazardous samples can generate aerosols if a tube leaks or breaks. This entry explains sealed rotors and buckets, careful loading, waiting before opening, and decontamination habits that reduce exposure. It stays at general practice level and defers to biosafety officers for agent-specific decisions and incident response.

45 minutes · Intermediate
Lab Techniques

Centrifuge Maintenance Log

A simple centrifuge log extends rotor life and reveals problems before they become failures. This entry covers routine cleaning, rotor inspection, logging speed, time, and unusual events, corrosion checks, and clear escalation when noise, vibration, or damage appears during everyday use.

20 minutes · Beginner
Lab Techniques

Centrifuge RCF Calculation and Balancing

Protocols written in revolutions per minute do not transfer between rotors, while relative centrifugal force does. This entry shows how to convert between the two using rotor radius, balance tubes correctly, and check tubes and speed limits before every run.

20 minutes · Beginner
Lab Techniques

Centrifuge Rotor Inspection

Rotors endure high stress and corrosion, so routine inspection prevents failures that damage instruments and endanger users. This guide covers visual checks for cracks and corrosion, lid and seal condition, expiry and derating awareness, cleaning, and logbook habits. Retire or refer any suspect rotor under manufacturer and institutional guidance.

30 minutes · Beginner
Lab Techniques

Certificate of Analysis Review

A certificate of analysis is evidence to be checked, not filed unread. This entry, which also covers reading the related material specification, explains matching the certificate to your specification limits, confirming lot identity and test coverage, spotting missing or out-of-limit results, and recording acceptance before the material is released for laboratory use.

1 hour · Intermediate
Lab Techniques

Chain of Custody Logging

Chain of custody records prove who held a sample at every step from collection to disposal. This entry explains unique identifiers, transfer signatures, dates and times, storage conditions, seal checks, and gap handling so sample history stays complete and defensible.

30 minutes · Beginner
Lab Techniques

Change Control Overview

Change control manages deliberate changes to methods, equipment, software, or materials so benefits are gained without silent harm. This overview covers raising a request, impact assessment, approvals, implementation planning, verification, communication, and closure records that keep validated work valid after the change.

1 hour · Intermediate
Lab Techniques

Chemical Glove Selection

No single glove resists every chemical, so selection starts with the substance, concentration, and contact type. This guide covers reading resistance charts, balancing dexterity and breakthrough awareness, inspection, changing frequency, and removal technique. Confirm choices against safety data and institutional guidance, especially for mixtures and prolonged immersion work.

45 minutes · Intermediate
Lab Techniques

Chemical Storage Segregation

Incompatible chemicals stored together can react dangerously if containers leak or break. This overview explains grouping by compatibility, separating acids, bases, oxidisers, and flammables, using secondary containment, clear labelling, and regular cupboard checks based on safety data and local rules.

45 minutes · Beginner
Lab Techniques

Chemical Waste Disposal

Good chemical waste habits protect people, drains, and waste handlers while keeping the laboratory compliant. This guide covers segregation by compatibility, suitable containers and labelling, fill limits, storage, and collection requests. Local rules decide final routes, so confirm categories and exclusions with your institution before accumulating any new stream.

1 hour · Beginner
Lab Techniques

Choosing Between a BSC and a Fume Hood

Biological safety cabinets and fume hoods look similar but protect against different hazards in different ways. This guide contrasts product, personnel, and environmental protection, airflow principles, and typical applications to support first-pass choices. Final placement always needs biosafety and chemical safety review for the specific agents and procedures involved.

1 hour · Intermediate
Lab Techniques

Clinical Sample Reception Overview

Careful reception protects patients, staff, and result quality from the moment samples arrive. This overview covers booking in, identity and condition checks, leak and labelling problems, priority handling, storage placement, and rejection communication at a general practice level following institutional rules.

45 minutes · Intermediate
Lab Techniques

Cold Chain Logging

Continuous temperature records prove that cold-sensitive materials stayed within limits from receipt to use. This guide explains logger placement, calibration checks, download intervals, alarm handling, and record review, plus what to file for audits. Consistent logging habits make excursions visible early and support confident release decisions for stored materials.

30 minutes · Beginner
Lab Techniques

Competency Assessment Basics

Attendance alone does not show someone can perform a task unsupervised. This overview explains direct observation, blind or repeat samples where appropriate, written checks, defining pass criteria in advance, documenting outcomes fairly, and planning reassessment when duties, methods, or performance change over time.

2 hours · Intermediate
Lab Techniques

Computer System Validation Overview

Computer system validation shows a laboratory system does what it should, reliably and under control, for its intended regulated use. This overview follows requirements, risk assessment, specification, testing, and controlled release, then the change and periodic review habits that keep the validated state true.

4 hours · Intermediate
Lab Techniques

Container Closure Integrity Overview

Container closure integrity confirms that a sealed package keeps contents in and contaminants out throughout shelf life. This overview compares deterministic and probabilistic approaches in general terms, positive controls, sensitivity awareness, and lifecycle testing points, so integrity evidence supports sterility and stability claims under approved protocols.

1.5 hours · Intermediate
Lab Techniques

Critical Reagent Management

Critical reagents are the few materials whose failure can invalidate an assay outright, so they need tighter identity, stability, and supply control. This entry explains listing and ranking critical items, bridging new lots, monitoring storage, and planning contingencies before a shortage or drift becomes a crisis.

2 hours · Intermediate
Lab Techniques

Cryogen Handling

Cryogenic liquids and solids provide extreme cold for storage and processing while posing burn, pressure, and asphyxiation hazards. This general guide outlines ventilation, suitable vessels, transfer habits, and PPE selection. Volumes, room size, and material properties change the risk, so always apply institutional procedures and training to your setup.

1 hour · Intermediate
Lab Techniques

Cybersecurity Basics for Laboratories

Laboratory cybersecurity protects instruments, results, and personal data from unauthorised access, malware, and accidental disclosure. This entry covers unique accounts, updates and malware protection, safe removable media and email habits, network awareness for instruments, and prompt reporting so small incidents stay small and recoverable.

1 hour · Beginner
Lab Techniques

Data Backup Verification

A backup that has never been checked is a hope, not a control. This entry explains confirming backup completion reports, sampling files for readability, testing restores in a safe location, recording verification results, and acting on failed jobs before the missing data is needed for real work.

2 hours · Intermediate
Lab Techniques

Data Integrity and ALCOA Principles

ALCOA principles keep laboratory data attributable, legible, contemporaneous, original, and accurate, with completeness and consistency expected in modern practice. This entry turns each principle into daily bench habits, shows common failure examples, and explains handling corrections so the original record always remains visible and trustworthy.

1 hour · Beginner
Lab Techniques

Data Normalisation for Assay Results

Normalisation puts runs on a common scale so differences reflect biology rather than plate or day effects. This entry explains blank subtraction, expressing results relative to controls, per-plate versus global scaling, and documenting every transformation applied to raw data Share the method with collaborators too.

1 hour · Intermediate
Lab Techniques

Degassing Buffers and Mobile Phases

Dissolved gases form bubbles that disturb chromatography, sensors, and sensitive reactions. This entry compares vacuum filtration, helium sparging in outline, sonication with vacuum, and inline degassers, and explains matching the method to the application and handling degassed liquids afterwards Note the method used each time.

30 minutes · Beginner
Lab Techniques

Deviation Logging

A deviation log records when work departs from the planned method so impact can be judged openly. This entry covers recognising a deviation, capturing facts promptly, assessing risk to results, assigning follow-up, and closing the record without altering original data or hiding the event.

30 minutes · Beginner
Lab Techniques

Dilution Series Design

Good dilution design balances range, resolution, and pipetting error. This guide helps you pick a dilution factor, keep transfer volumes comfortably pipettable, plan replicates, and avoid the compounding mistakes that make the lowest concentrations unreliable in serial schemes Good records make each scheme reusable later.

30 minutes · Beginner
Lab Techniques

Disaster Recovery for Laboratory IT: Overview

Laboratory disaster recovery planning keeps essential testing and records alive through failures of power, systems, premises, or suppliers. This overview covers prioritising services, defining recovery targets, documenting workarounds and rebuild order, and exercising the plan so the first real test is not the incident itself.

4 hours · Intermediate
Lab Techniques

Document Numbering System

A predictable numbering system lets staff retrieve the current version quickly and spot obsolete copies. This entry describes choosing meaningful prefixes, keeping numbers stable through revisions, handling attachments and forms, maintaining a master list, and avoiding numbers that embed details likely to change over time.

2 hours · Beginner
Lab Techniques

Dosimeter Basics Overview

Personal dosimeters record occupational exposure to ionising radiation over a wear period so doses can be reviewed by the radiation protection service. This general overview explains issue and wear in principle, storage away from sources, prompt return for reading, and why results are handled only through institutional programmes.

30 minutes · Beginner
Lab Techniques

Dry Ice Shipping Basics

Dry ice keeps shipments frozen but brings pressure, cold-burn, and transport labelling duties. This overview covers estimating quantity, vented packaging, insulation, marking, and handover checks at a general practice level. Always confirm carrier and institutional rules before dispatch, because requirements vary by mode, destination, and material type.

2 hours · Intermediate
Lab Techniques

Dye Ingress Test Overview

Dye ingress testing immerses sealed containers in coloured solution under stated vacuum or pressure conditions to reveal leaks by visible dye entry. This overview covers positive and negative controls, immersion and inspection in outline, probabilistic limits of the approach, and careful interpretation under an approved, validated protocol only.

2 hours · Intermediate
Lab Techniques

Electrical Safety in the Laboratory

Laboratories mix water, chemicals, and many powered instruments, which raises the cost of casual electrical habits. This entry covers visual cable checks, avoiding overloaded sockets, keeping liquids away from supplies, and reporting damage promptly. Only qualified personnel should open equipment or alter fixed wiring under institutional arrangements.

30 minutes · Beginner
Lab Techniques

Electronic Signature Basics

An electronic signature binds an identified person to a record and its meaning at a moment in time. This entry covers identity checks, what signing actually attests, protecting credentials, signature manifestation on printed records, and good habits that keep electronic approval as trustworthy as ink.

45 minutes · Beginner
Lab Techniques

ELN Audit Trail Basics

An electronic lab notebook audit trail quietly records who changed what and when, making work traceable long after the experiment ends. This overview explains version history, timestamps, electronic signatures, reason-for-change prompts, and routine checks that keep records complete, attributable, and ready for review or audit.

30 minutes · Beginner
Lab Techniques

Emergency Shower and Eyewash Testing

Emergency showers and eyewashes help only if they are accessible, activate quickly, and deliver clean tepid water. This entry covers routine activation testing, access checks, flushing and inspection habits, and record keeping. Testing supports weekly readiness checks under local rules; report faults immediately and keep units unobstructed at all times.

30 minutes · Beginner
Lab Techniques

Environmental Chamber Qualification

Qualifying an environmental chamber shows it can hold stated conditions across its usable space before valuable material depends on it. This overview outlines installation and operational checks, empty and loaded studies in outline, alarm and door-opening behaviour, and documented acceptance so later monitoring rests on demonstrated performance evidence.

4 hours · Advanced
Lab Techniques

Equipment Calibration Schedule

A clear schedule prevents overdue calibrations and surprise downtime. This guide shows how to list every calibrated item, set intervals from history and manufacturer guidance, build in booking lead time, handle items in storage, and review completion so nothing quietly slips past its due date.

1.5 hours · Beginner
Lab Techniques

Equipment Qualification Overview

Equipment qualification provides documented evidence that an instrument is installed correctly, operates within limits, and performs suitably for its intended use. This overview introduces installation, operational, and performance qualification in plain terms, with planning, acceptance criteria, deviations, and requalification triggers.

2 hours · Intermediate
Lab Techniques

Extractables and Leachables Overview

Extractables are compounds drawn from packaging or device materials under aggressive laboratory conditions, while leachables migrate under normal use. This overview introduces risk-based assessment in outline, material knowledge, analytical screening awareness, and toxicological review, emphasising specialist design and institutional approval before any study with product-contact materials begins.

2 hours · Advanced
Lab Techniques

Eye Protection Selection

Splashes, impacts, dust, and optical radiation each demand different eye protection, and ordinary spectacles rarely suffice. This entry compares safety spectacles, goggles, and face shields, fit and anti-fog considerations, and care habits. Choose protection rated for the actual hazard and confirm requirements in the task risk assessment first.

30 minutes · Beginner
Lab Techniques

Fluorescence Calibration and Gain Check

Fluorescence signals drift with lamp age, gain, and plate choice, so periodic calibration keeps results comparable. This entry describes using a stable reference, checking linearity across dilutions, setting gain to avoid saturation, and documenting settings for longitudinal studies Keep dated records for trend review.

1 hour · Intermediate
Lab Techniques

Fluorescence Reference Standards

Stable fluorescence references let you compare signal across days, gains, and instruments without relying on fragile samples. This entry covers choosing appropriate standards, storage and handling, dilution checks, acceptance ranges, and trending results so drift is caught before studies are affected.

1 hour · Intermediate
Lab Techniques

FMEA Basics Overview

Failure mode and effects analysis lists how a process could fail, how bad and how detectable each failure would be, and where controls matter most. This overview covers mapping steps, scoring consistently as a team, acting on the highest risks, and keeping the document alive.

2 hours · Intermediate
Lab Techniques

Forced Degradation Basics

Forced degradation deliberately stresses small samples with heat, light, oxidation or pH extremes to reveal likely breakdown pathways and challenge analytical methods. This general overview stresses approved protocols, modest targeted degradation rather than total destruction, safety review of stress conditions, and using results only for method development understanding.

3 hours · Advanced
Lab Techniques

Form Design for Controlled Documents

A well-designed form captures complete, legible records the first time. This guide covers field order matching workflow, unambiguous labels, space for corrections, version identification on every page, and checks that prevent missing entries when the record is later reviewed or audited by others.

2 hours · Beginner
Lab Techniques

FPLC Basics Overview

Fast protein liquid chromatography purifies proteins at low pressure using aqueous buffers. This overview covers system flow path, column packing checks, buffer filtration and degassing, equilibration, sample loading, gradient elution, fraction collection, and cleaning for reuse Careful setup protects valuable samples and columns.

4 hours · Intermediate
Lab Techniques

Freezer Inventory and Sample Storage Basics

A freezer without an inventory hides samples until they are useless. This entry describes box maps, durable labelling that survives cold, a simple register or spreadsheet, location rules by temperature, and periodic audits that keep valuable material findable and traceable.

2 hours · Beginner
Lab Techniques

Fume Hood Use

A fume hood protects the user only when airflow, sash position, and work habits support containment. This entry covers pre-use checks, apparatus placement, sash discipline, storage limits, and alarm responses for routine chemical work. If containment is in doubt, stop, lower the sash, and report the problem promptly.

1 hour · Beginner
Lab Techniques

GAMP Basics Overview

GAMP offers a risk-based lifecycle approach for specifying, verifying, and maintaining computerised systems in regulated laboratories. This overview explains system categories, supplier leverage, scalable verification effort, and the specification-to-testing trace that auditors expect, without treating the framework as a paperwork ritual disconnected from risk.

2 hours · Intermediate
Lab Techniques

Gas Cylinder Handling

Compressed gas cylinders store large energy in a portable form and need careful handling from delivery to return. This entry covers securing, cap and regulator awareness, leak checks, segregation, and transport with trolleys. Confirm gas-specific hazards from safety data and local rules before connecting or moving any cylinder.

1 hour · Intermediate
Lab Techniques

Gauge Block Basics Overview

Gauge blocks provide precise reference lengths for checking calipers, micrometers and other dimensional tools. This overview covers grades in general terms, careful cleaning and wringing, temperature awareness, stacking to build a required length, and storage habits that protect accuracy and prevent corrosion between uses in routine work.

1 hour · Intermediate
Lab Techniques

GC Basics Overview

Gas chromatography separates volatile compounds as an inert gas carries them through a heated column. This overview introduces carrier gas, inlet, column, oven programme, and detector in general terms, plus safe start-up checks, blanks, standards, and shutdown habits for routine work.

2 hours · Intermediate
Lab Techniques

Gravimetric Calibration of Pipettes

Pipettes drift with use, drops, and worn seals, and gravimetric checking is the simplest way to catch it. This entry walks through weighing dispensed water on a calibrated balance, correcting for temperature, and judging accuracy and precision against typical tolerances.

2 hours · Intermediate
Lab Techniques

HPLC Basics Overview

High-performance liquid chromatography separates compounds as they pass through a pressurised column. This overview explains the pump, injector, column, and detector, mobile phase preparation, equilibration, system suitability, and the routine care that keeps pressure and peaks stable Good housekeeping prevents most routine failures.

3 hours · Intermediate
Lab Techniques

HPLC Column Conditioning

A new or stored column needs gradual wetting and equilibration before it gives stable retention and peak shape. This entry covers inspecting fittings, flushing storage solvent, stepping solvent strength, monitoring pressure, and confirming readiness with a suitability injection before samples.

2 hours · Intermediate
Lab Techniques

HPLC System Suitability

System suitability proves the whole HPLC setup is fit on the day, before unknown samples are committed. This entry explains selecting a representative standard, predefined limits for retention, precision, resolution, and peak shape, handling failures, and bracketing samples with ongoing checks.

1 hour · Intermediate
Lab Techniques

Humidity Mapping

Humidity mapping extends temperature mapping by showing how relative humidity varies with position and time inside a chamber or room. This overview covers combined temperature-humidity loggers, placement, equilibration, door and loading effects, and interpreting gradients so storage conditions are claimed only where sensors prove they are met.

3 hours · Intermediate
Lab Techniques

Hygrometer Check

Room humidity affects reagents, powders, and some instruments, so hygrometers need periodic checking like any other sensor. This entry describes comparing against a reference instrument or standard environment, allowing equilibration, spotting drift or placement problems, and recording results for environmental monitoring.

30 minutes · Beginner
Lab Techniques

ICH Stability Basics Overview

ICH stability guidance harmonises how shelf life is supported with data from samples stored at stated conditions and tested over time. This overview explains long-term and accelerated concepts in general terms, batch and packaging considerations, and why protocols and commitments are agreed with quality and regulatory functions beforehand.

1.5 hours · Intermediate
Lab Techniques

Incoming Goods Inspection

Checking goods on arrival catches wrong, damaged, or expired items before they reach the bench. This guide covers matching deliveries to orders, checking identity, quantity, condition, and expiry, sampling where full checks are impractical, quarantining suspect items, and recording acceptance so stock enters use with confidence.

1 hour · Beginner
Lab Techniques

Incubator CO2 Calibration Overview

Incubator carbon dioxide control influences media pH and cell growth, yet the display is only as good as its calibration. This overview explains sensor types in general terms, independent gas measurement, stabilisation, adjustment by trained users, and documentation without opening or servicing sealed components.

1 hour · Intermediate
Lab Techniques

Inspection Readiness

Steady readiness beats last-minute tidying before an inspection. This entry covers maintaining evidence as you go, preparing a concise facility and process overview, assigning host and scribe roles, rehearsing document retrieval, briefing staff to answer honestly, and handling findings calmly during and after the visit.

3 hours · Intermediate
Lab Techniques

Laboratory Coat Policy

A laboratory coat protects skin and everyday clothing only when it is worn, fastened, and changed appropriately. This entry covers coat selection for the hazard, wearing and removal habits, laundering routes, and storage away from clean areas. Dedicated coats for higher-hazard work should follow institutional policy and risk assessment.

30 minutes · Beginner
Lab Techniques

Laboratory Investigation Overview

A laboratory investigation turns an unexpected result into an evidence-based conclusion about validity and impact. This overview covers securing data, checking for clear laboratory error, deciding when to widen the investigation, and closing with actions that prevent recurrence without assuming the first explanation is correct.

2 hours · Intermediate
Lab Techniques

Laboratory Notebook Records: Good Practice

A notebook written for a stranger is the backbone of reproducible work. This entry covers contemporaneous entries, aims and conclusions, exact reagent and instrument identifiers, raw data locations, honest recording of failures, and habits for paper or electronic systems Good records support audit and publication.

30 minutes · Beginner
Lab Techniques

Laboratory Risk Assessment Basics

A risk assessment done before work starts prevents the improvisation that causes accidents. This overview explains identifying hazards, judging likelihood and severity, choosing controls in a sensible order, considering waste and emergencies, and reviewing the assessment when anything changes Review assessments after incidents too promptly.

1 hour · Beginner
Lab Techniques

Laminar Flow Hood Use

Laminar flow hoods bathe work in filtered air to protect products from contamination, but they do not protect the user. This entry covers warm-up, disinfection, material placement, and unhurried technique for clean work. Never use a laminar flow hood for hazardous materials that require operator or environmental containment controls.

45 minutes · Beginner
Lab Techniques

Laser Safety Basics

Lasers concentrate light into beams that can injure eyes and skin before a blink reflex helps. This overview explains beam control, eyewear awareness, signage, and alignment habits at an introductory level. Laser classes and controls differ widely, so work only under a local laser safety programme and specific training.

1 hour · Intermediate
Lab Techniques

Legal Hold Basics Overview

A legal hold pauses normal destruction for records relevant to a dispute or investigation. This overview explains recognising a hold notice, identifying affected records, suspending disposal, communicating the duty to custodians, preserving electronic and paper copies, and releasing the hold only on written instruction from authorised staff.

1.5 hours · Intermediate
Lab Techniques

Levey-Jennings Chart Basics

A Levey-Jennings chart plots control results over time against a mean and spread derived from baseline performance, making drift visible at a glance. This entry covers building the chart, placing typical limit lines, plotting honestly, and reading common patterns without overreacting to single points.

1 hour · Beginner
Lab Techniques

Licence Management for Lab Software

Missed renewals and unlicensed installs both disrupt laboratory work. This entry explains recording licence type and seat counts, tracking expiry and renewal dates, controlling installation to entitled machines, handling vendor audits calmly, and budgeting ahead so critical analysis tools never lapse mid-project without warning.

2 hours · Beginner
Lab Techniques

LIMS Barcode Labelling

Barcode labels link a physical tube to its digital record, reducing transcription errors and lost samples. This entry covers label content, printer and stock checks, applying labels so scanners read them, verifying against the laboratory system, and handling damaged or duplicate labels.

45 minutes · Beginner
Lab Techniques

Liquid Nitrogen Safety

Liquid nitrogen enables cryostorage yet can displace oxygen, cause cold burns, and pressurise sealed containers. This general overview outlines ventilation, oxygen monitoring awareness, suitable containers and PPE, and safe decanting habits. Work only under local rules and training, and seek institutional safety guidance before handling larger volumes.

1 hour · Intermediate
Lab Techniques

Luminescence Cross-Talk Check

Bright wells can leak signal into neighbours and invent false positives in luminescence assays. This simple check uses strong and blank wells in a deliberate pattern to measure spillover, choose suitable plates, and set layout rules that protect low signals near high ones.

45 minutes · Intermediate
Lab Techniques

Lux Meter Check

Light levels affect visual inspection, plant and culture work, and some stability studies. A periodic lux meter check compares the instrument against a reference source or meter under stable conditions, confirms sensible readings across the range, and flags sensor ageing or damage before surveys are relied upon.

45 minutes · Beginner
Lab Techniques

Lyophilisation (Freeze-Drying) Basics

Freeze-drying removes water by sublimation, leaving a stable, easily stored solid. This overview explains pre-freezing, why fill depth and container choice matter, primary and secondary drying in outline, vacuum checks, and how to judge and store the finished product Record cycle details for every batch.

24 hours · Intermediate
Lab Techniques

Maintenance Work Order

A work order turns a fault report into tracked, authorised repair work. This guide covers raising the order with clear symptoms, prioritising by impact, assigning the job, recording parts and time, verifying the fix, and closing the order so the equipment history stays complete and searchable.

1 hour · Beginner
Lab Techniques

Mass Spectrometry Tuning Overview

Tuning aligns a mass spectrometer so mass accuracy, resolution, and sensitivity are trustworthy for the day's work. This overview explains calibration standards, automated and manual checks in general terms, vacuum and source readiness, acceptance limits, and when to stop and call specialist support.

2 hours · Advanced
Lab Techniques

Measurement Uncertainty Basics

Every measurement carries uncertainty from instruments, environment, operators and the sample itself. This overview introduces Type A and Type B contributions, combining them into a standard uncertainty, and reporting an expanded interval so readers can judge whether a result truly supports the decision being made from it.

1.5 hours · Intermediate
Lab Techniques

Method Robustness Testing

Robustness shows whether small, deliberate changes in method conditions disturb results. This entry covers picking plausible factors such as time, temperature, reagent lot, or operator, varying them one at a time or by a small planned design, and tightening instructions where the method proves fragile.

4 hours · Intermediate
Lab Techniques

Method Transfer Overview

Method transfer proves a receiving laboratory can run a method and obtain comparable results to the originating laboratory. This entry outlines transfer plans, training and familiarisation runs, shared samples, predefined comparison criteria, and handling differences in equipment or reagents without quietly rewriting the method mid-study.

4 hours · Intermediate
Lab Techniques

Method Validation: Accuracy

Accuracy shows how closely a method recovers a known amount of analyte in its real sample matrix. This entry covers preparing spiked or reference samples across the range, comparing recovered with expected values, checking for matrix bias, and documenting results in a validation-ready format.

2 hours · Intermediate
Lab Techniques

Method Validation: Linearity

Linearity testing checks whether response grows proportionally with concentration across the claimed range. This entry covers choosing independent levels, avoiding serial-dilution error, inspecting plots and residuals, and resisting the habit of accepting a curve on a correlation value alone without looking at fit.

2 hours · Intermediate
Lab Techniques

Method Validation: LOD and LOQ

Detection and quantitation limits mark where a method stops seeing analyte reliably and where it starts measuring it usefully. This entry outlines blank-based, signal-based, and precision-based approaches, confirmation at the claimed quantitation level, and honest reporting when samples fall between the two limits.

3 hours · Intermediate
Lab Techniques

Method Validation: Precision

Precision describes how closely repeated measurements agree under stated conditions, from same-run replicates to different days, analysts, and instruments. This entry separates repeatability, intermediate precision, and reproducibility, and shows how to design replicate sets and summarise spread without overstating what small studies can prove.

3 hours · Intermediate
Lab Techniques

Method Validation: Range

Range is the interval between the lowest and highest amounts where a method has shown suitable accuracy, precision, and linearity together. This entry explains deriving range from combined evidence, testing the extremes deliberately, and setting routine dilution or repeat rules outside that interval.

2 hours · Intermediate
Lab Techniques

Method Validation: Specificity

Specificity asks whether a method measures only the intended analyte when matrix, related compounds, and degradation products are present. This entry covers blanks, interfering substances, and stressed samples, how to judge interference fairly, and how to record limits of the claim in the validation report.

2 hours · Intermediate
Lab Techniques

Mock Audit Basics

A mock audit rehearses people and systems before an external inspection. This guide explains setting a realistic scope, using an auditor independent of the area, following evidence trails, grading findings consistently, giving feedback constructively, and tracking agreed actions so the exercise improves readiness rather than causing alarm.

2 hours · Beginner
Lab Techniques

Out-of-Tolerance Impact Assessment

When calibration finds an instrument outside tolerance, past results need a documented judgement. This entry covers defining the affected period, estimating error size and direction, identifying affected samples and reports, deciding whether results stand or need repeat, and recording the rationale for every decision made.

3 hours · Intermediate
Lab Techniques

Outlier Identification Rules for Laboratory Data

Removing awkward points without rules invites bias, while keeping obvious errors distorts results. This entry explains pre-setting outlier criteria, technical reasons for exclusion, simple statistical tests in outline, sensitivity checks, and transparent reporting of every excluded value Document decisions for audit and review.

45 minutes · Intermediate
Lab Techniques

Password Policy for Laboratory Systems

Shared benches and shared instruments make password practice a practical design problem. This entry covers setting length and change rules people can follow, handling shared instrument accounts safely, using password managers where permitted, responding to suspected compromise, and avoiding practices that push staff toward written passwords.

1.5 hours · Beginner
Lab Techniques

Peroxide-Forming Chemicals

Some solvents and reagents slowly form shock-sensitive peroxides during storage, especially after opening or exposure to air. This entry covers recognising common formers, dating containers, storage limits, and disposal referral habits. Never test or handle suspect crystals casually; stop and seek institutional chemical safety guidance immediately for advice.

45 minutes · Intermediate
Lab Techniques

Personnel Qualification

Qualification links a role to the education, training, and experience needed before independent work. This entry covers writing role requirements, matching evidence to each requirement, authorising staff for defined tasks, restricting duties until qualified, and reviewing qualifications when roles or methods change significantly.

2 hours · Beginner
Lab Techniques

Photostability Basics Overview

Photostability testing examines whether light changes a material enough to need protective packaging or labelling. This general overview introduces controlled light exposure alongside dark controls, sample presentation in outline, and evaluation of appearance and assay, emphasising protocol approval and product-specific decisions by the responsible quality function.

2 hours · Intermediate
Lab Techniques

Pipette Leak Test

A leaking pipette delivers less than the display promises and often drips unnoticed during transfers. This quick test helps you spot worn seals or damaged tip cones by observing a filled tip over time, cleaning correctly, and deciding when servicing is required.

15 minutes · Beginner
Lab Techniques

Plate Reader Pathlength Correction

Well volume changes the light path in a plate, so absorbance is not directly comparable across fill levels. This entry explains pathlength correction concepts, using instrument features or reference readings, checking uniformity, and applying corrections consistently in routine absorbance assays.

45 minutes · Intermediate
Lab Techniques

Plate Reader Setup and Optimisation

Setting up a microplate reader correctly saves an assay before it starts. This entry covers plate type selection, warm-up, blank and control wells, read height and gain checks, and a quick uniformity test so day-to-day reads are comparable and edge effects are spotted early.

45 minutes · Beginner
Lab Techniques

PPE Selection

Personal protective equipment is the last control layer, chosen to match the hazard, task, and wearer. This guide explains assessing chemical, biological, thermal, and mechanical risks, checking fit and compatibility, and combining items without creating new problems. Selection always follows the risk assessment and institutional PPE programme requirements.

45 minutes · Beginner
Lab Techniques

Pressure Vessel Basics

Autoclaves and other pressure vessels combine heat, steam, and stored energy, so respect for ratings and interlocks matters. This overview introduces nameplate limits, loading awareness, cycle records, and routine checks at a general level. Only trained, authorised users should operate such equipment under institutional procedures and maintenance schedules.

2 hours · Intermediate
Lab Techniques

Privileged Access for Lab Systems

Administrator rights allow changes that affect data and system behaviour, so they need tighter control. This overview explains granting privileged access only for defined duties, using separate accounts, logging elevated actions, reviewing holders frequently, and removing rights promptly when duties end or staff change roles.

2 hours · Intermediate
Lab Techniques

Radiation Survey Meter Basics Overview

Radiation survey meters detect ionising radiation so areas and items can be checked under an authorised programme. This general overview covers source and background checks, battery and response verification, contamination versus dose-rate awareness, and strict adherence to institutional authorisation, training and radiation protection procedures at all times.

1 hour · Intermediate
Lab Techniques

Radioactivity Basics Overview

Work with radioactive materials demands specialist controls for contamination, exposure, waste, and record keeping. This overview sketches core concepts such as activity, shielding, monitoring, and segregation at a general educational level only. Any practical work requires radiation protection approval, specific training, and institutional licences before materials are ordered.

2 hours · Advanced
Lab Techniques

Reagent Inventory and FIFO Rotation

First-in, first-out rotation uses older stock first and reduces waste from expired reagents. This entry covers receiving checks, clear expiry labelling, shelf layout, opening dates, periodic stock review, and quarantine of expired or suspect material so bench supplies stay reliable.

45 minutes · Beginner
Lab Techniques

Reagent Qualification

Reagent qualification confirms a new lot or supplier performs acceptably in the actual assay before routine use depends on it. This entry covers risk-based test design, side-by-side comparison with the current lot, acceptance criteria set in advance, and quarantining unqualified stock so it cannot slip into use.

2 hours · Intermediate
Lab Techniques

Reference Material Traceability

Traceability links a laboratory result through an unbroken chain of comparisons to a recognised reference, each step carrying stated uncertainty. This overview explains certificates, lot identity, storage records and audit trails so any reported value can be traced back to its source material without gaps.

1 hour · Intermediate
Lab Techniques

Reference Standard Handling

Reference standards anchor every quantitative result, so their identity, storage, and use must stay traceable and protected. This entry covers receipt checks, storage and aliquoting, expiry and retest discipline, use logs, and what to do when a standard looks compromised before it quietly biases results.

1 hour · Intermediate
Lab Techniques

Replicate Layout and Randomisation on Plates

Where samples sit on a plate can create patterns that look like results. This entry covers technical versus biological replicates, spreading groups across the plate, balancing edge wells, simple randomisation methods, and recording the final map before you pipette Good design strengthens every downstream conclusion.

45 minutes · Intermediate
Lab Techniques

Respirator Basics Overview

Respirators protect airways only within a managed programme of selection, fit testing, training, and maintenance. This overview distinguishes dust masks from respirators, introduces fit and seal concepts, and stresses medical and programme prerequisites in general terms. Never rely on a respirator without institutional respiratory protection approval and documented fit testing.

1 hour · Intermediate
Lab Techniques

Retention Schedule Basics

A retention schedule states how long each record type is kept and what happens afterwards. This overview covers grouping records, setting periods from legal and business needs, naming owners, handling storage location, approving destruction, and reviewing the schedule when regulations or laboratory activities change materially over time.

2 hours · Beginner
Lab Techniques

Risk-Based Monitoring in the Laboratory

Risk-based monitoring focuses oversight effort where errors would hurt results most and where data suggests trouble is likely. This entry covers choosing indicators, setting review rhythms and thresholds, mixing central data checks with targeted on-site review, and adjusting the plan as evidence accumulates over time.

2 hours · Intermediate
Lab Techniques

Root Cause Analysis: Fishbone Diagrams

A fishbone diagram organises possible causes of a laboratory problem into groups so teams investigate evidence instead of arguing opinions. This entry covers defining the effect precisely, brainstorming causes under standard headings, testing the plausible few, and converting confirmed causes into corrective actions.

1 hour · Beginner
Lab Techniques

Sample Aliquoting Strategy

Thoughtful aliquoting protects a precious sample from repeated freeze-thaw and contamination while matching future assay needs. This guide helps you plan aliquot number and volume, label before pipetting, mix and work cleanly, record locations, and reserve material for repeats or failures.

45 minutes · Beginner
Lab Techniques

SDS Reading Basics

A safety data sheet condenses hazards, handling, storage, and emergency advice into a standard format. This guide shows new users where to find hazard statements, protective equipment, first aid, spill, and disposal information quickly, and how to apply it before starting work.

30 minutes · Beginner
Lab Techniques

Self-Inspection Checklist

A structured self-inspection lets a team spot drift before an auditor does. This entry covers building a checklist from real requirements, walking the area with fresh eyes, sampling records rather than reading everything, scoring honestly, assigning actions with owners, and repeating checks at a steady, sustainable rhythm.

1.5 hours · Beginner
Lab Techniques

Sharps Handling

Needles, blades, and broken glass cause preventable injuries when handled or discarded carelessly. This entry covers planning to minimise sharps, safe use at the bench, never recapping by hand where prohibited, correct container use, fill limits, and what to do after an injury.

20 minutes · Beginner
Lab Techniques

Sharps Waste Disposal

Needles, blades, and broken contaminated glass injure waste handlers when they enter the wrong stream. This update reinforces rigid container use at the point of work, fill limits, closure, and labelling, plus what never belongs in sharps bins. Pair it with local training so disposal matches current institutional expectations.

30 minutes · Beginner
Lab Techniques

SI Units in Laboratory Practice

Consistent SI units prevent conversion errors that quietly change a result by orders of magnitude. This entry covers base and derived units seen daily in the laboratory, clear prefix use, unit labelling on records and spreadsheets, and simple dimensional checks that catch mistakes before results leave the bench.

30 minutes · Beginner
Lab Techniques

Software Inventory for Laboratories

Laboratories depend on instrument and analysis software that is easy to forget in asset records. This guide covers listing every package and version, linking software to instruments and computers, recording install media and keys securely, and keeping the inventory current through changes and upgrades over time.

2 hours · Beginner
Lab Techniques

SOP Template Design

A consistent template helps readers find purpose, responsibilities, and steps without hunting. This entry covers header and version fields, section order, plain-language drafting, approval blocks, revision history, and formatting choices that keep procedures readable, printable, and easy to review on schedule.

2 hours · Beginner
Lab Techniques

SOP Writing Structure

A clear standard operating procedure lets a trained reader repeat a task the same way every time. This guide outlines a practical structure covering purpose, scope, responsibilities, materials, stepwise instructions, safety, references, and revision history, plus plain-language tips that reduce ambiguity and training errors.

1 hour · Beginner
Lab Techniques

Sound Level Meter Basics

Sound level meters give a first indication of noisy areas that may need formal occupational assessment. This overview introduces weighting and response settings in general terms, acoustic calibrator checks before and after surveys, microphone placement, and the limits of screening measurements compared with regulated exposure monitoring programmes.

45 minutes · Beginner
Lab Techniques

Spare Parts Management for Laboratories

Holding the right spares shortens downtime without tying up budget in rarely used stock. This entry explains identifying critical parts, setting minimum levels from usage, labelling and storing parts traceably, linking parts to assets, and reviewing stock when equipment is retired or replaced by newer models.

2 hours · Beginner
Lab Techniques

Spectrophotometer Blanking and Baseline Checks

A correct blank subtracts everything except your analyte, and a poor one silently biases every reading. This entry covers cuvette choice and handling, matched blank composition, warm-up, baseline scans, and simple checks that reveal dirty optics or drifting lamps Routine checks protect every later measurement.

30 minutes · Beginner
Lab Techniques

Spectrophotometer Wavelength Check

If the wavelength setting drifts, absorbance values shift even when samples are perfect. This entry describes checking wavelength accuracy with approved reference materials or built-in standards, recording peak positions, applying only authorised corrections, and scheduling service when errors exceed tolerance.

45 minutes · Intermediate
Lab Techniques

Spill Response Basics

A calm, correct first response limits harm from a laboratory spill. This entry outlines raising the alarm, protecting people, judging whether a spill is within your training, basic containment with approved kits, waste handling, reporting, and restocking so the next response is ready.

30 minutes · Beginner
Lab Techniques

Stability Chamber Monitoring

Stability chambers hold samples at stated temperature and humidity for months or years, so continuous monitoring and alarm response protect the study. This entry covers independent probe placement from mapping evidence, routine record review, excursion assessment in outline, backup arrangements, and keeping samples traceable during any transfer.

1 hour · Intermediate
Lab Techniques

Stability Protocol Design

A stability protocol written before samples are stored defines batches, conditions, time points, tests and acceptance criteria so shelf-life claims rest on planned evidence. This entry covers objective setting, bracketing and matrixing awareness, specification linkage, deviation handling, and approval signatures that make the study defensible when reviewed later.

2 hours · Advanced
Lab Techniques

Stability Sample Pull Schedule

Pulling stability samples on schedule keeps every time point valid; a missed pull can leave a gap that no later testing repairs. This entry explains building a pull calendar from the protocol, labelling and inventory control, pull windows in general terms, documentation at removal, and reconciling remaining stock.

45 minutes · Beginner
Lab Techniques

Stability-Indicating Method Basics

A stability-indicating method measures the intact analyte without interference from degradation products, impurities or excipients. This overview introduces demonstrating specificity with degraded samples in outline, peak purity awareness, mass balance thinking, and validation linkage, so changes seen during storage can be trusted as real rather than artefacts.

2 hours · Advanced
Lab Techniques

Standard Curve Preparation

A well-made standard curve turns a raw signal into a trustworthy concentration. This entry explains choosing a range that brackets your samples, preparing independent dilutions, running replicates, checking linearity, and deciding when a curve is good enough to use for unknowns.

1 hour · Beginner
Lab Techniques

Sterilisation of Solutions by Filtration

Filtration sterilises heat-sensitive solutions without an autoclave, provided the membrane and technique are right. This entry covers pore size choice, membrane compatibility, wetting and flushing, aseptic collection, integrity clues, and labelling so filtered stocks stay sterile in storage Check expiry dates before starting work.

45 minutes · Beginner
Lab Techniques

Stress Testing Basics

Stress testing explores how temperature, humidity, light and other extremes affect a material beyond routine stability conditions. This overview distinguishes exploratory development stress from formal stability studies, emphasises single-factor design in outline, and explains how findings inform packaging, storage statements and method development under quality oversight throughout.

1.5 hours · Intermediate
Lab Techniques

Supplier Audit Overview

Supplier audits check that critical goods and services are made under suitable control. This overview covers deciding which suppliers merit audit, planning scope from risk, reviewing quality systems and records on site or remotely, reporting findings with evidence, and agreeing follow-up proportionate to the products supplied to you.

3 hours · Intermediate
Lab Techniques

Supplier Qualification

Qualification decides whether a supplier may provide goods or services before orders begin. This entry covers defining approval criteria by risk, gathering quality and capability evidence, running trial orders where appropriate, approving and listing qualified suppliers, and re-evaluating status after problems, changes, or long inactivity periods.

2 hours · Beginner
Lab Techniques

System Suitability Criteria

System suitability criteria are the checks, run before or during an assay, that prove the whole system is fit to report results that day. This overview explains choosing checks tied to real failure modes, setting limits from method evidence, and stopping reporting when suitability fails.

1 hour · Intermediate
Lab Techniques

Tachometer Calibration Overview

Tachometers verify that centrifuges, stirrers and other rotating equipment actually run at the displayed speed. This overview covers optical and contact methods in general terms, reflective marking, comparison at several set points, safety around rotating parts, and recording results so speed-dependent methods remain reproducible across instruments and days.

1 hour · Intermediate
Lab Techniques

Temperature Chamber Mapping

Temperature mapping places calibrated sensors throughout a chamber to find hot and cold spots and confirm uniformity over time. This entry covers sensor placement in outline, loaded and empty considerations, study duration, identifying routine monitoring positions, and using the map to justify where product and probes should sit.

3 hours · Intermediate
Lab Techniques

Temperature Excursion Assessment

When a freezer, fridge, or shipment drifts outside its set range, a structured assessment protects samples and data. This entry covers recording the event, mapping affected items, reviewing logger traces, judging stability from product knowledge, and documenting disposition decisions with quality oversight before anything is used or discarded.

1 hour · Intermediate
Lab Techniques

Thermometer Ice-Point Calibration Check

The ice point gives a simple, reproducible reference for checking thermometers near zero degrees. This entry explains making a proper ice-water slurry, immersing the probe correctly, allowing stabilisation, recording the offset, and deciding when adjustment, correction, or replacement is needed.

30 minutes · Beginner
Lab Techniques

Timer Calibration

Laboratory timers govern incubations, reactions and equipment cycles, yet they are rarely checked. This entry shows how to compare bench timers and stopwatches against a traceable time reference over representative intervals, record deviations, set acceptance limits, and label devices so overdue timers are not used unknowingly again.

45 minutes · Beginner
Lab Techniques

Torque Calibration Overview

Torque tools that drift deliver joints that are too loose or over-stressed without any visible sign. This overview describes checking wrenches and drivers against a reference analyser, testing across the usable range in both directions where applicable, recording as-found values, and deciding adjustment or removal from service.

1.5 hours · Intermediate
Lab Techniques

Training Record Management

Training records prove who was trained, on what version, and when. This entry covers what each record should contain, filing by person and by document, tracking expiries and retraining triggers, handling electronic signatures, and producing a clean training matrix for reviews and inspections.

1.5 hours · Beginner
Lab Techniques

Trending, OOS and OOT Basics

Out-of-specification and out-of-trend results need different, disciplined responses, and trending connects single events into a bigger picture. This entry distinguishes confirmed failures from unusual-but-in-limit results, outlines first response and documentation, and shows how periodic trend review triggers prevention before specifications break.

2 hours · Intermediate
Lab Techniques

Ultracentrifuge Basics Overview

Ultracentrifuges reach very high speeds for separations that benchtop units cannot achieve. This high-level overview introduces rotor choice, tube filling and balancing, vacuum and refrigeration concepts, and run documentation. It is general information only; operation requires specific training, manufacturer instructions, and institutional authorisation before any independent use.

3 hours · Advanced
Lab Techniques

User Access Review

Regular access reviews remove accounts and permissions that work no longer needs. This entry covers obtaining a current user list, matching access to role and duties, challenging dormant and shared accounts, recording keep or remove decisions, and confirming removals happened as agreed with system owners.

2 hours · Intermediate
Lab Techniques

Using a Chemical Incompatibility Chart

Storing or mixing incompatible chemicals can trigger heat, gas, fire, or violent reactions. This entry shows how to read a compatibility chart, check safety data, segregate storage groups, and escalate doubtful pairings. Charts guide routine decisions but never replace substance-specific data and institutional chemical safety advice for novel combinations.

45 minutes · Beginner
Lab Techniques

UV Safety in the Laboratory

Ultraviolet sources support imaging and sterilisation tasks but can burn skin and damage eyes without obvious warning. This entry covers shielding, interlocks, exposure minimisation, and eyewear and glove awareness for common bench sources. Follow equipment instructions and local rules, and never bypass guards to view a source directly.

30 minutes · Beginner
Lab Techniques

Vacuum Safety in the Laboratory

Vacuum speeds filtration and drying but can implode glassware and pull hazards into pumps. This entry covers inspecting glassware, shielding, trap use, tubing condition, and controlled venting before opening systems. Keep setups simple, wear eye protection, and follow local equipment instructions for pumps, gauges, and cold traps.

45 minutes · Beginner
Lab Techniques

Weighing Hygroscopic Reagents Accurately

Hygroscopic powders gain water from the air while you weigh them, so the mass on the balance is not all compound. This entry describes drying and storage, fast weighing by difference, minimising exposure, and recording conditions so concentrations stay honest.

30 minutes · Beginner
Lab Techniques

Westgard Rules Overview

Westgard rules are a set of decision rules that combine control results within and across runs to flag random error and systematic shift while limiting false alarms. This overview explains the common warning and rejection patterns, choosing rules by risk, and documenting the response.

1 hour · Intermediate
Lab Techniques

Work Instruction Design

Work instructions turn a procedure into bench-level guidance for one task. This entry explains how to scope a single job, sequence photographs or diagrams with text, flag critical checks, keep the instruction to a usable length, and link it clearly to its parent procedure.

1.5 hours · Beginner
Lab Techniques

Working Standard Preparation

Working standards translate a primary reference into the solutions an assay uses daily, and small preparation errors propagate into every result. This entry covers qualification against the reference, preparation and labelling, storage and expiry assignment, and verification checks that keep working lots trustworthy.

1 hour · Intermediate
Lab Techniques

X-ray Safety Overview

X-ray generating equipment supports imaging and analysis while requiring strict control of exposure. This high-level overview introduces shielding, interlocks, dosimetry awareness, and controlled-area habits in general terms. It does not authorise operation; all work must follow radiation protection advice, equipment instructions, and institutional licensing and training requirements.

2 hours · Advanced