Immunology protocols

ELISA, flow cytometry, PBMC, ELISPOT and immune-cell assays — written as bench-ready procedures.

167 protocols

Immunology

Adhesion Molecule Expression Assay Overview

Adhesion molecule assays quantify surface molecules that mediate leukocyte trafficking, usually by flow cytometry on blood cells or cultured endothelium before and after stimulation. Staining temperature and stimulation timing strongly affect expression. This overview covers general experimental design, controls, and analysis principles for approved research studies.

Overview, half day · Intermediate
Immunology

Agglutination Assays Overview

Agglutination assays detect antibodies or antigens through visible clumping of antigen-coated particles, red cells, or latex beads mixed with sample. Strength is graded against positive and negative controls under consistent lighting and timing. This overview covers slide and tube formats, grading discipline, and common causes of misleading clumping.

1-2 hours · Beginner
Immunology

Allergy Skin Test Overview

Allergy skin testing introduces tiny amounts of allergen extract into the skin under clinical supervision to observe local wheal and flare responses alongside controls. This overview covers ordering, controls, timing, reading, and documentation at a general level only. Performance, interpretation, and emergency readiness require trained clinical staff and institutional approval.

Overview, half day · Intermediate
Immunology

Allergy-Specific IgE Assay Overview

Allergen-specific IgE assays detect serum IgE binding to defined allergen extracts or components on a solid phase, supporting allergy investigation alongside clinical history. Semi-quantitative classes and quantitative units are platform specific. This overview stresses controls, total IgE context, and the rule that laboratory sensitisation alone does not establish clinical allergy.

3-4 hours · Intermediate
Immunology

Antibody Affinity Measurement Overview

Affinity describes the strength of a single antibody binding site for its antigen, usually summarised as an equilibrium dissociation constant from binding curves at several concentrations. Overview planning covers choosing a labelled-antigen or surface-based format, reaching equilibrium, and fitting data carefully rather than treating a single signal as affinity.

1-2 days · Advanced
Immunology

Antibody Cross-Reactivity Testing Overview

Cross-reactivity testing checks whether an antibody binds structurally related molecules or unintended targets besides its intended antigen. A panel of related and unrelated antigens is assayed alongside the true target. Clear specificity data protect assay interpretation, especially where related family members coexist in samples.

Overview, 1-2 days · Intermediate
Immunology

Antibody Isotyping Assay Overview

Antibody isotyping identifies the class and subclass of an immunoglobulin in hybridoma supernatant, serum, or purified preparations using isotype-specific capture or detection reagents. Knowing isotype informs purification choice and effector expectations. Include purified standards for each isotype sought and interpret weak signals against matched background controls.

3-4 hours · Beginner
Immunology

Antibody Titration for Flow Cytometry Panels

Antibody titration finds the lowest amount giving maximal separation between positive and negative populations in flow cytometry. Using the actual sample type, staining volume, and instrument settings makes the result transferable to experiments. Titration reduces background, saves reagent, and improves resolution of dim or rare populations.

2-3 hours · Beginner
Immunology

Antibody-Dependent Cellular Phagocytosis Overview

Antibody-dependent cellular phagocytosis measures how opsonising antibodies promote engulfment of labelled targets by macrophages or other phagocytes. Fluorescent target uptake is quantified by imaging or flow cytometry. Effector health, opsonisation level, and effector-to-target ratio are the main variables to standardise.

1-2 days · Advanced
Immunology

Antigen-Specific T Cell Enrichment Overview

Antigen-specific T cell enrichment concentrates rare peptide-reactive T cells before analysis, typically by capturing tetramer-labelled cells on magnetic beads. Enrichment makes low-frequency populations countable by flow cytometry. Input cell number, labelling efficiency, and column handling determine the final detection limit of the method.

3-4 hours · Advanced
Immunology

Antinuclear Antibody Testing Overview

Antinuclear antibody testing screens for autoantibodies associated with systemic autoimmune diseases, classically by indirect immunofluorescence on HEp-2 cells with pattern and titre reporting. Solid-phase screens are also used in some pathways. Consistent substrate, screening dilution and trained pattern reading keep results reproducible and clinically useful.

Overview, half day · Intermediate
Immunology

Antiphospholipid Testing Overview

Antiphospholipid testing measures antibodies such as anticardiolipin and anti-beta-2 glycoprotein I alongside lupus anticoagulant studies in accredited laboratories. Persistent positivity over time and clinical context guide interpretation. This overview summarises sample requirements, controls, and reporting principles at a general level without providing diagnostic thresholds.

Overview, half day · Advanced
Immunology

Assay Bridging Study Basics for Method Changes

Bridging studies demonstrate that results remain comparable when an assay changes platform, site, calibrator or major reagent. Paired samples spanning the measuring range are tested by both versions and agreement is assessed. A planned bridge with pre-set criteria prevents silent shifts in reported results after changeover.

Overview, 2-3 days · Intermediate
Immunology

Autoantibody Screening Overview

Autoantibody screening detects serum antibodies against self-antigens using solid-phase immunoassays or cell-based substrates in a research or reference workflow. Screening results are semi-quantitative and require confirmatory testing in validated settings. Cut-off controls, dilution, and interference awareness are central to correct classification.

3-4 hours · Intermediate
Immunology

Autoimmune Panel Testing Overview

An autoimmune panel groups autoantibody tests that support evaluation of systemic autoimmune conditions under clinical direction. Test selection, assay method, and result patterns matter more than any single result. This overview describes general principles for ordering awareness, sample handling, controls, and reporting without replacing rheumatology or laboratory medicine judgement.

Overview, half day to 1 day · Intermediate
Immunology

B-Cell ELISPOT Assay for Antibody-Secreting Cells

B-cell ELISPOT counts individual antibody-secreting cells by capturing secreted immunoglobulin on an antigen- or anti-immunoglobulin-coated membrane. Total and antigen-specific spots can be measured in parallel wells. Cell quality, coating choice and gentle handling determine whether spots are discrete and countable after development.

Overview, 2-3 days · Intermediate
Immunology

Basophil Activation Test Overview by Flow Cytometry

The basophil activation test measures activation markers on blood basophils after short ex vivo stimulation with allergen or control reagents. It supports allergy research when performed with fresh blood and careful gating. Pre-analytical timing, temperature control, and positive controls strongly influence the result.

3-4 hours · Advanced
Immunology

Biotin Interference in Immunoassays Overview

Excess biotin from supplements can saturate streptavidin capture systems, falsely lowering sandwich assay results and raising competitive assay results. The pattern depends on assay architecture, so direction alone never excludes interference. This overview covers recognition, sample history, repeat timing, and alternative testing for laboratories using biotin-dependent platforms.

Overview, half day · Intermediate
Immunology

BNP and NT-proBNP Assay Overview

B-type natriuretic peptide and its N-terminal fragment are measured by immunoassay to support assessment of cardiac wall stress in appropriate clinical settings. Sample stability, platform differences and patient factors such as renal function affect values. Laboratories must report the exact analyte and method because results are not interchangeable.

Overview, 1-2 hours · Beginner
Immunology

Bone Marrow Flush Preparation Overview

Bone marrow flush preparation recovers haematopoietic cells by flushing marrow cavities of long bones with medium using a syringe and needle. The suspension contains mixed progenitors and mature cells for phenotyping or culture. Gentle flushing, filtration, and red cell handling preserve progenitor viability.

45-60 minutes · Intermediate
Immunology

Bronchoalveolar Lavage Cell Preparation Overview

Bronchoalveolar lavage cell preparation concentrates macrophages and leukocytes from returned lavage fluid for counting, cytology, and phenotyping. Samples may be clinical or from approved animal studies, and governance differs accordingly. Prompt cold processing, mucus filtration, and recording returned volume are essential because cell concentration depends directly on recovery and dilution.

2-3 hours · Intermediate
Immunology

C-Reactive Protein Assay Overview

C-reactive protein assays quantify a major acute-phase protein that rises with inflammation, infection and tissue injury. Immunoturbidimetric and immunoassay formats cover standard and high-sensitivity ranges on automated platforms. Consistent calibration, dilution of very high samples and quality control keep results comparable over time.

Overview, 1-2 hours · Beginner
Immunology

Cellular ELISA Overview for Cell-Surface Antigen Detection

Cellular ELISA measures antigens displayed on intact adherent cells fixed gently in plate wells, preserving surface context while allowing plate-reader quantification. It suits screening antibody binding to native conformations. Careful fixation, cell density control, and non-specific binding checks are needed because signal reflects both antigen abundance and cell number.

4-6 hours · Intermediate
Immunology

CFSE Proliferation Assay for Lymphocytes

CFSE labelling tracks lymphocyte division because fluorescence halves with each generation after stimulation. Flow cytometry then reveals the number of divisions and proportion of cells responding. Even labelling, low dye toxicity, and an unstimulated parent-peak control are required to resolve proliferation peaks clearly over several days.

4-5 days · Intermediate
Immunology

Chemiluminescent Immunoassay Overview

Chemiluminescent immunoassays use enzyme or chemical labels that emit light on triggering, giving sensitive automated quantification of antibodies and antigens. Magnetic particle separation, stringent washing, and calibrator curves support wide measuring ranges. This overview covers analyser workflow, calibration, and quality checks for staff operating established clinical platforms under governance.

Overview, half day · Intermediate
Immunology

Chimerism Monitoring After Transplant Overview

Chimerism monitoring estimates donor and recipient cell proportions after haematopoietic stem cell transplant using informative genetic markers in accredited molecular laboratories. Lineage-specific fractions, assay sensitivity, and trends over time guide specialist review. This overview outlines general sampling, analysis, and reporting principles for education, with clinical actions directed by transplant teams.

Overview, 1 day · Advanced
Immunology

Clinical Cut-Off Determination Basics

A clinical cut-off separates results more likely associated with a condition from those that are not, balancing sensitivity and specificity for the intended use. Determining one needs well-characterised positive and negative groups and transparent statistics. This overview describes the general approach without replacing clinical validation.

Overview, planning study · Intermediate
Immunology

Cold Agglutinin Testing Overview

Cold agglutinin testing looks for red cell agglutination that appears in the cold and reverses on warming, performed in transfusion or haematology laboratories under specialist protocols. Temperature control during collection and testing is decisive. This overview gives general handling and reading principles only and does not guide transfusion or treatment decisions.

Overview, half day · Intermediate
Immunology

Compensation Controls and Setup for Flow Cytometry

Compensation corrects spectral overlap between fluorochromes in multicolour flow cytometry. Single-stain controls for every colour, plus an unstained control, allow software to calculate spillover accurately. Controls must be at least as bright as samples and treated identically, otherwise corrected data can show over- or under-compensation artefacts.

1-2 hours · Intermediate
Immunology

Competitive ELISA for Small Antigens and Antibodies

Competitive ELISA measures analyte by its ability to reduce binding of a labelled competitor to a coated target. Signal falls as sample concentration rises, making the format useful for small molecules and single-epitope antigens. A well-fitted standard curve and matched diluent are essential for interpretation.

1-2 days · Intermediate
Immunology

Complement Activation Products Measurement Overview

Complement activation products are fragments generated when complement pathways are triggered, measured by immunoassays that demand rapid, cold sample handling to prevent ex vivo activation. Strict pre-analytics matter more than small analytical differences. This overview describes general collection, stabilisation, control, and storage principles for research or specialist laboratory contexts.

Overview, half day · Advanced
Immunology

Complement Activity Assessment (CH50-Style Assay)

Complement haemolytic assays assess classical pathway function by measuring serum-mediated lysis of sensitised red cells. Activity is highly sensitive to sample handling, freezing, and delay. Fresh or properly frozen serum, careful serial dilution, and complete-lysis and blank controls are required to calculate activity reliably.

2-3 hours · Advanced
Immunology

Complement C3 and C4 Measurement Overview

Complement C3 and C4 measurement quantifies these abundant serum proteins, most often by automated immunoturbidimetric or nephelometric platforms in clinical and research laboratories. Low values can reflect consumption, while raised values occur with inflammation. Overview use covers sample quality, calibration, and reference-interval awareness rather than diagnostic interpretation for individual patients.

1-2 hours · Beginner
Immunology

Complement Fixation Test Overview

Complement fixation detects antigen-specific antibody by whether immune complexes consume complement and thereby prevent lysis of indicator red cells. The format demands careful titration of every reagent and extensive controls. Although largely replaced by newer immunoassays, this overview preserves the setup, control logic, and reading principles for reference laboratories.

Overview, 1-2 days · Advanced
Immunology

Crossmatch Testing Overview

Crossmatch testing checks whether recipient serum reacts with donor cells or surrogates before transplantation, helping identify preformed donor reactivity. Physical and virtual approaches each have strengths and limits. This overview describes sample pairing, controls, and reporting at a general level within an accredited histocompatibility service and its clinical governance.

Overview, same day · Advanced
Immunology

Cryoglobulin Sample Handling Overview

Cryoglobulin testing fails most often through cold exposure before serum separation, because the proteins of interest precipitate prematurely and are lost. Warm collection, transport, clotting, and centrifugation are therefore the core of the method. This overview summarises general warm-chain principles for specialist laboratories and stresses strict adherence to local procedures.

Overview, 2-4 days including observation · Intermediate
Immunology

Cryopreservation and Thawing of PBMC

Controlled cryopreservation preserves PBMC for batch analysis and longitudinal studies, while rapid thawing and gentle washing restore viability. Consistent cell concentration, freezing rate, and storage below vapour-phase liquid nitrogen temperatures are critical. Checking recovery and viability after thaw determines whether cells suit functional assays.

1 hour freezing plus 30 minutes thawing · Beginner
Immunology

Cytokine Bead Array Quality Control Checks

Bead array QC verifies that a multiplex cytokine run is fit for analysis before concentrations are reported. Checks cover bead counts, standard curve recovery, control values, and replicate agreement. Reviewing QC first prevents wasted interpretation of runs affected by low events or poor curve fit.

1-2 hours (QC review) · Intermediate
Immunology

Cytokine Release Assay Overview

A cytokine release assay stimulates whole blood or isolated cells with antigens or mitogens and measures cytokines released into supernatant as a functional immune readout. Unstimulated and positive controls define background and responsiveness. Careful timing, sterile handling, and matched supernatant storage are essential for comparing conditions and donors reliably.

2 days · Intermediate
Immunology

Cytokine Storm Panel Overview

Cytokine storm panels measure multiple inflammatory mediators together to characterise hyperinflammatory states in research or specialist laboratory settings. Multiplex results depend heavily on timing, sample handling and assay range. This overview covers panel setup and interpretation principles at a general level, not clinical decision guidance.

Overview, half day · Intermediate
Immunology

D-Dimer Assay Overview

D-dimer assays detect fibrin degradation products formed when cross-linked fibrin is broken down, using immunoturbidimetric or immunoassay methods on citrated plasma. Results support exclusion pathways only within validated clinical algorithms. Correct citrate fill, prompt processing and assay-specific units and cut-offs are essential for safe reporting.

Overview, 1-2 hours · Beginner
Immunology

Delayed-Type Hypersensitivity Overview

Delayed-type hypersensitivity is a T-cell-mediated response that develops over one to three days after antigen encounter in a sensitised host, assessed in research settings by tissue swelling and cellular infiltration. This overview outlines principles, controls, and humane endpoints only. Any in vivo work requires prior ethics, veterinary, and institutional approval.

Study dependent · Advanced
Immunology

Direct ELISA for Antigen Detection

Direct ELISA detects antigen adsorbed to a plate using a single enzyme-labelled primary antibody. It is faster than sandwich formats and suits purified antigens or screening work. Signal depends on coating quality and antibody activity, so blocking, washing, and a dilution series are needed for reliable comparisons.

1 day · Beginner
Immunology

Donor Specific Antibody Testing Overview

Donor specific antibody testing detects recipient antibodies directed against donor HLA antigens, most often with solid-phase bead assays interpreted alongside donor typing. Signal strength is semi-quantitative and assay dependent. This overview covers sampling, bead assay checks, and reporting principles for review by the histocompatibility and transplant teams.

Overview, 1-2 days · Advanced
Immunology

Electrochemiluminescence Immunoassay Overview

Electrochemiluminescence immunoassays generate light when a label is electrochemically triggered at an electrode surface, combining sensitive detection with automated washing and calibration. Electrode condition and reagent handling govern background and reproducibility. This overview outlines platform workflow, calibration acceptance, and routine troubleshooting for operators of established clinical systems.

Overview, half day · Intermediate
Immunology

ELISPOT Analysis and Spot Counting

ELISPOT analysis converts developed plates into spot-forming units per million cells using consistent reader settings, size and intensity thresholds, and replicate review. Counting choices can change conclusions, so parameters should be set on controls, locked, and applied uniformly. Manual verification of representative wells guards against artefacts from fibres, edges, and uneven development.

2-3 hours · Intermediate
Immunology

ELISPOT Assay for Cytokine-Secreting Cells

ELISPOT detects individual cells secreting a cytokine after stimulation, producing spots where secretion was captured on a membrane. It is widely used to measure antigen-specific T-cell frequencies. Careful cell handling, appropriate positive and negative controls, and consistent development are essential for countable, reproducible spot patterns.

2-3 days · Intermediate
Immunology

Eosinophil Isolation Overview

Eosinophil isolation enriches relatively rare granulocytes from blood, usually by removing other leukocytes through density separation followed by negative magnetic selection. Gentle, endotoxin-aware handling preserves viability and limits activation. Purity checks should confirm eosinophil identity and exclude neutrophil contamination before functional experiments, which require approved human-material procedures.

3-4 hours · Advanced
Immunology

Epitope Mapping Overview for Antibodies

Epitope mapping identifies the region of an antigen recognised by an antibody, using overlapping peptides, fragments or competition with antibodies of known specificity. Knowing the epitope explains cross-reactivity, assay pairing and variant escape. This overview outlines common strategies at a general level for research planning.

Overview, 2-5 days · Advanced
Immunology

External Quality Assessment Basics

External quality assessment compares a laboratory result with those of other laboratories or a reference value using distributed samples. It complements internal quality control by revealing bias invisible within one site. Regular participation, honest routine handling and structured review of reports sustain confidence in reported results.

Overview, planning review · Beginner
Immunology

Ferritin Assay Overview

Ferritin immunoassays measure the iron-storage protein in serum or plasma, informing iron status assessment while also rising as an acute-phase reactant. Automated sandwich assays provide wide measuring ranges with dilution for high values. Interpretation considers inflammation and liver status alongside iron indices, not ferritin alone.

Overview, 1-2 hours · Beginner
Immunology

Fixable Viability Staining for Flow Cytometry

Fixable viability dyes label dead cells with compromised membranes and retain the signal through fixation and permeabilisation. This allows live-cell gating in intracellular staining workflows. Staining is done in protein-free buffer before surface staining so the dye reacts efficiently with cellular amines.

45-60 minutes · Beginner
Immunology

Flow Cytometry Crossmatch Overview

The flow cytometry crossmatch incubates recipient serum with donor lymphocytes to detect donor-reactive antibodies by fluorescent staining in histocompatibility laboratories. Viable donor cells, careful pronase or control use where validated, and channel shift criteria are central. This overview outlines general principles only, under transplant centre governance and consent.

Overview, half day · Advanced
Immunology

Flow Cytometry Immunophenotyping of PBMC

Immunophenotyping uses fluorescent antibodies to identify immune cell subsets by surface markers in a single-cell suspension. A logical panel, viability dye, and proper controls allow measurement of T, B, NK, and monocyte populations. Consistent staining, compensation, and gating are central to interpretable flow cytometry results.

3-4 hours · Intermediate
Immunology

Flow Cytometry Panel Design Checks

Panel design checks confirm that marker and fluorophore combinations can resolve the populations of interest on the available instrument. Bright dyes are reserved for dim antigens, spillover into key detectors is minimised, and controls are planned in advance. A structured check avoids unusable panels.

2-3 hours (design review) · Intermediate
Immunology

Fluorescence Spreading Matrix Check in Flow Cytometry

The spreading matrix quantifies how compensated spillover widens negative populations and reduces resolution in each detector. Reviewing it during panel validation shows which fluorophore pairs limit sensitivity. High spreading pairs should be separated onto markers that are not co-expressed or are not both critical.

1-2 hours · Intermediate
Immunology

FluoroSpot ELISPOT for Dual Cytokine Secretion

FluoroSpot extends ELISPOT by capturing two secreted cytokines with distinct fluorophores on the same membrane well. It reveals whether individual cells co-secrete mediators after stimulation. Sterile handling, gentle cell addition, and fluorescence-compatible development steps are critical to preserve spot quality and colour separation.

2-3 days · Advanced
Immunology

FluoroSpot Image Analysis Overview

FluoroSpot analysis counts single- and dual-secreting cells from fluorescent spot images captured in separate channels. Channel alignment, exposure consistency and colour compensation decide whether co-secretion calls are trustworthy. This overview describes image review, gating and reporting steps after plates have been developed and dried.

Overview, 2-3 hours (analysis) · Advanced
Immunology

Ganglioside Antibody Testing Overview

Ganglioside antibody testing measures IgG or IgM reactivity to nerve glycolipids by immunoassay or blot in specialised laboratories investigating certain neuropathies. Low-level reactivity can be non-specific, so controls and clinical context are vital. This overview presents general analytical principles without diagnostic thresholds or treatment guidance.

Overview, 1 day · Advanced
Immunology

Generation of Monocyte-Derived Dendritic Cells

Monocyte-derived dendritic cells are generated by culturing isolated monocytes with growth factors that drive dendritic differentiation over several days. The resulting immature cells can be matured with defined stimuli for antigen-presentation studies. Sterile technique, consistent feeding, and phenotype checks determine culture success.

6-8 days · Intermediate
Immunology

Haemagglutination Inhibition Assay Overview

Haemagglutination inhibition measures antibodies that block a haemagglutinating antigen from clumping red blood cells, producing a titre based on the highest effective dilution. Red cell quality, antigen dose standardisation, and serum pretreatment strongly affect results. This overview covers setup and reading principles for trained serology staff in governed laboratories.

Overview, 1 day · Intermediate
Immunology

Haemolysis, Lipemia and Icterus Sample Integrity Check

Checking samples for haemolysis, lipemia and icterus before immunoassay prevents wasted runs and misleading results caused by colour, turbidity or released cellular contents. Visual inspection or automated indices flag compromised specimens so they can be recollected, clarified or reported with an appropriate limitation comment.

Overview, 30 minutes (checks) · Beginner
Immunology

Heterophile Antibody Interference Overview

Heterophile antibodies in a sample can bridge capture and detection antibodies without analyte, causing falsely high or occasionally low immunoassay results. Clues include non-linear dilution and results discordant with the clinical picture. This overview covers recognition, blocking tube checks, and alternative-method confirmation for laboratory investigation of suspect results.

Overview, half day · Intermediate
Immunology

HLA Antibody Screening Overview

HLA antibody screening detects sensitisation to human leukocyte antigens using solid-phase bead assays in accredited histocompatibility laboratories supporting transplant and transfusion services. Cut-offs, single-antigen follow-up, and clinical context determine meaning. This overview summarises general workflow and quality principles, with all decisions governed by transplant centre policies.

Overview, half day · Advanced
Immunology

HLA Typing Overview

HLA typing determines human leukocyte antigen alleles used in transplantation, donor matching, and disease association studies. Methods range from serological and low-resolution molecular tests to high-resolution sequencing. This overview covers sample requirements, method selection, quality checks, and reporting principles under accredited histocompatibility laboratory governance and validated workflows.

1-3 days depending on method · Advanced
Immunology

Hook Effect Check in Immunoassays Overview

The hook effect, or prozone, occurs when extremely high analyte saturates capture and detection reagents separately, producing a falsely low signal in one-step immunoassays. Dilution paradoxically raises the measured result. This overview describes when to suspect hooking, how to check with dilutions, and how to report corrected concentrations safely.

Overview, 2 hours · Intermediate
Immunology

Hormone Immunoassay Overview

Hormone immunoassays quantify peptide and steroid hormones at low concentrations using competitive or sandwich formats on automated platforms. Binding proteins, cross-reacting metabolites and collection timing strongly influence results. Standardised collection, assay-specific reference intervals and interference awareness are central to trustworthy endocrine laboratory reporting.

Overview, half day · Intermediate
Immunology

Immune Cell Phenotyping Panel Design Overview

Immune cell phenotyping panels combine lineage and functional markers to enumerate and characterise blood or tissue populations by flow cytometry. Marker density, fluorochrome brightness, spillover, and biological co-expression drive good design. This overview summarises general panel planning, titration, validation, and quality principles for research or accredited clinical adaptation.

Overview, half day · Intermediate
Immunology

Immune Complex Assay Basics

Immune complex assays estimate circulating antigen-antibody aggregates in serum using binding to complement components or precipitation-based capture. Results are sensitive to sample handling, freeze-thaw history, and complement activity. Standards, heat-inactivated controls, and consistent dilution are required for meaningful comparison between samples.

3-5 hours · Intermediate
Immunology

Immune Cytotoxicity Assay Using Target Cells

Cytotoxicity assays quantify killing of labelled target cells by NK cells or cytotoxic T lymphocytes across effector-to-target ratios. Spontaneous and maximum release or death controls define the assay window. Careful effector preparation, consistent incubation, and appropriate readout selection distinguish specific killing from background target death.

5-6 hours · Advanced
Immunology

Immune Monitoring Sample Logging and Tracking

Sample logging records every immune monitoring specimen from receipt to storage so results can be traced to donor, time point, and processing conditions. Consistent identifiers, timing records, and deviation notes protect longitudinal studies. Logging at the bench, not retrospectively, is the core quality practice.

30-60 minutes per batch · Beginner
Immunology

Immune Reconstitution Monitoring Overview

Immune reconstitution monitoring follows recovery of lymphocyte subsets, immunoglobulins, and vaccine responses after stem cell transplant, chemotherapy, or immune therapy. Consistent panels and time points reveal delayed or uneven recovery. This overview describes scheduling, panel consistency, and trending, with interpretation reserved for the responsible clinical team.

Overview, longitudinal · Advanced
Immunology

Immune Repertoire Profiling Basics

Immune repertoire profiling catalogues the diversity of B-cell and T-cell receptors in a sample, usually from sequencing data after targeted library preparation. It can reveal expansions, diversity changes and shared clones across samples. Careful sampling, controls and transparent analysis choices are essential for believable repertoire conclusions.

Overview, planning study · Advanced
Immunology

Immunoassay Dilution Linearity Check

Dilution linearity confirms that a sample diluted across the measuring range returns proportionally consistent concentrations after correction for dilution. It detects matrix effects, hook effects and interfering substances. A high sample is serially diluted in validated diluent and recovery at each level is compared with the neat result.

Overview, half day · Intermediate
Immunology

Immunoelectrophoresis Overview

Immunoelectrophoresis separates serum proteins by charge, then develops precipitin arcs with antibodies diffused from a trough, revealing major protein fractions and gross abnormalities. Arc position and shape are compared with normal control serum run alongside. This overview covers separation, diffusion, staining, and interpretation limits for trained laboratory staff.

2 days · Intermediate
Immunology

Immunofixation Electrophoresis Overview

Immunofixation combines electrophoretic separation with monospecific antisera to characterise restricted immunoglobulin bands in serum or urine within accredited laboratories. Careful antisera application, washing, staining, and expert pattern review are central. This overview outlines general workflow and quality principles for education, with all reporting restricted to trained clinical services.

Overview, 1 day · Intermediate
Immunology

Immunofluorescence Staining of Cultured Immune Cells

Immunofluorescence uses fluorescent antibodies to visualise protein location in fixed cells while preserving cellular structure. Proper fixation, permeabilisation, blocking, and mounting reveal specific staining with low background. Including no-primary and single-stain controls helps distinguish true signal from autofluorescence and non-specific binding during imaging.

1 day · Beginner
Immunology

Immunoglobulin Quantification by Nephelometry Overview

Nephelometric immunoglobulin quantification measures IgG, IgA, and IgM in serum from light scattered by antigen-antibody complexes formed with specific antisera. Automated analysers provide calibration, dilution, and antigen-excess checks. Sound overview practice emphasises sample integrity, quality control acceptance, and awareness that paraproteins or very high concentrations may need dilution and repeat analysis.

1-2 hours · Beginner
Immunology

Immunoglobulin Subclass Measurement Overview

Immunoglobulin subclass measurement quantifies IgG subclasses and sometimes other classes by nephelometry, turbidimetry, or immunoassay to support specialist immunology assessment. Age-related reference intervals and total immunoglobulin context are essential. This overview covers general calibration, control, and reporting principles without providing reference ranges or diagnostic criteria.

Overview, half day · Intermediate
Immunology

Immunohistochemistry for Immune Markers in Tissue

Immunohistochemistry localises immune markers in formalin-fixed tissue sections while preserving morphology. Deparaffinisation, antigen retrieval, blocking, and controlled chromogen development reveal staining in anatomical context. Positive, negative, and isotype controls, together with a known control tissue, are essential before interpreting staining intensity or distribution.

2 days · Intermediate
Immunology

Immunotherapy Monitoring Overview

Immunotherapy monitoring follows clinical response, immune biomarkers, and adverse effects over treatment cycles using consistent sampling, assays, and records. This overview describes scheduling, sample timing relative to doses, result trending, and escalation routes. Treatment decisions remain with the prescribing clinical team under approved protocols and governance.

Overview, longitudinal · Intermediate
Immunology

In Vitro Immune Cell Depletion Overview

Depletion removes a defined subset, such as CD8 T cells or B cells, from a mixed suspension so the remaining population can be studied or compared with undepleted controls. Magnetic or complement-based approaches are common at overview level. Verify removal by flow cytometry and monitor viability, recovery, and activation effects.

2-3 hours · Intermediate
Immunology

Indirect ELISA for Antibody Detection

Indirect ELISA detects antibodies in serum or plasma using immobilised antigen and an enzyme-labelled anti-immunoglobulin reagent. A dilution series helps distinguish specific binding from background. With appropriate positive, negative, and blank controls, the format supports serology screening and endpoint titre estimation in a straightforward plate-based workflow.

1-2 days · Beginner
Immunology

Interferon Gamma Release Assay Overview

Interferon gamma release assays stimulate blood cells with specific antigens and measure interferon gamma as an indicator of prior sensitisation, used mainly in tuberculosis assessment pathways. Nil and mitogen controls judge background and cell responsiveness. This overview covers handling and interpretation principles for accredited diagnostic services and clinical review.

2 days · Intermediate
Immunology

Intestinal Lamina Propria Cell Isolation Overview

Intestinal lamina propria cell isolation frees immune cells from mucosal tissue after removing epithelium and digesting the remaining matrix with enzymes. Tissue may be animal or approved human biopsy or resection material. Enzyme choice, digestion time, and gentle handling determine yield and marker preservation, so schedules must be validated for the species and segment studied.

4-6 hours · Advanced
Immunology

Intracellular Cytokine Bead Assay Overview

This overview covers bead-based measurement of cytokines captured within permeabilised cells or cell lysates where a validated bead format is used, distinct from surface staining of secreting cells. Bead fluorescence reports cytokine amount per sample rather than per-cell frequency. Careful lysis, standard preparation, and bead recovery determine whether low-abundance cytokines are detectable.

1-2 days · Advanced
Immunology

Intracellular Cytokine Staining by Flow Cytometry

Intracellular cytokine staining combines stimulation, secretion blockade, surface staining, fixation, and permeabilisation to identify cytokine-producing cells by flow cytometry. It links cytokine production to defined subsets at single-cell level. Timing of secretion inhibitors and including unstimulated controls are decisive for sensitivity and correct interpretation.

6-8 hours · Advanced
Immunology

Isotype and Control Selection for Antibody Staining

Appropriate controls distinguish specific antibody staining from background in flow cytometry and other immunoassays. Isotype controls have limited value compared with fluorescence-minus-one and biological controls, but can reveal non-specific binding problems. Matching concentration, fluorochrome, and treatment conditions is essential if an isotype control is used.

1-2 hours · Beginner
Immunology

IVIG Preparation Overview

Intravenous immunoglobulin preparation covers checking, reconstituting where applicable, and presenting licensed immunoglobulin products for administration by authorised clinical staff. Products differ in concentration, stabilisers, and handling. This overview addresses pharmacy checks, storage, inspection, and documentation only. Prescribing, rate setting, and administration require clinical authorisation and governance.

Overview, 1-2 hours · Intermediate
Immunology

Lateral Flow Immunoassay Reading Overview

Lateral flow immunoassay reading covers applying sample, timing development, and interpreting control and test lines against the product instructions. Lighting, reading window, and line intensity rules differ between products. This overview supports consistent reading, recording, and escalation of invalid results in point-of-care and laboratory settings under local governance.

Overview, 30 minutes · Beginner
Immunology

Lot-to-Lot Comparison for Immunoassay Reagents

Lot-to-lot comparison verifies that a new reagent or calibrator lot performs equivalently to the lot in use before it enters routine service. Patient samples and controls are tested on both lots and agreement is reviewed. Early detection of lot shifts protects longitudinal results and external quality performance.

Overview, half day · Beginner
Immunology

Luminex Multiplex Bead Assay for Cytokines

Luminex bead assays measure many soluble analytes simultaneously in a small sample volume using colour-coded magnetic beads. They suit cytokine profiling in serum, plasma, and supernatants. Accurate standard curves, bead resuspension, and avoiding bead loss during washing are critical for reliable multiplex quantification across all analytes.

4-5 hours or overnight protocol · Intermediate
Immunology

Lupus Anticoagulant Testing Overview

Lupus anticoagulant testing detects phospholipid-dependent inhibitors using screening, mixing, and confirmatory clotting assays under specialist direction. Platelet-poor plasma preparation and anticoagulant interference awareness are critical. This overview outlines general workflow principles at a high level and emphasises referral to accredited coagulation laboratories for patient testing.

Overview, half day · Advanced
Immunology

Lymph Node Cell Preparation Overview

Lymph node preparation releases lymphocytes from small lymphoid tissues by gentle teasing or strainer dissociation into cold medium. Nodes yield fewer cells than spleen, so losses during filtration and washing must be minimised. Pooling nodes and keeping volumes small improves recovery for downstream staining.

30-45 minutes · Beginner
Immunology

M1 and M2 Macrophage Marker Panel

An M1 and M2 marker panel combines surface proteins, intracellular enzymes or transcription readouts, and secreted cytokines to describe macrophage activation states more reliably than any single marker. Panels should include resting and known stimulated controls from the same donor. Interpretation stays descriptive because human macrophage states overlap and markers vary with differentiation method.

4-5 hours · Intermediate
Immunology

Macrophage Polarisation in Culture

Macrophage polarisation culture first differentiates monocytes into resting macrophages, then applies defined stimuli to bias inflammatory or alternative activation states for comparison. Stimulus identity, dose, and duration, plus donor variation, shape the resulting phenotype. Use resting controls, viability checks, and multiple markers rather than naming states from a single readout.

5-7 days · Intermediate
Immunology

MACS Enrichment and FACS Sorting of Immune Cells

Magnetic enrichment and fluorescence-activated sorting isolate defined immune subsets for culture or molecular analysis. MACS offers rapid bulk enrichment, while FACS provides high purity based on multiple markers. Starting with a viable, clump-free suspension and appropriate controls preserves yield, purity, and post-sort cell function.

3-5 hours · Advanced
Immunology

Magnetic Bead Enrichment: Positive and Negative Selection

Magnetic bead enrichment isolates immune subsets either by retaining labelled target cells or by depleting labelled non-target cells. Positive selection is fast and pure; negative selection leaves targets untouched. Choice depends on downstream use, starting frequency, and whether bead binding could affect cell function.

1-2 hours · Intermediate
Immunology

Mast Cell Degranulation Overview

Mast cell degranulation assays quantify mediator release after receptor cross-linking or other stimulation of cultured mast cells or model lines. Released enzyme or mediator in supernatant is compared with total cellular content. Cell health, sensitisation state, and stimulation timing determine the dynamic range.

2-4 hours · Intermediate
Immunology

Matrix Effect Evaluation for Immunoassays

Matrix effect evaluation compares assay response in the intended sample matrix against response in a reference diluent or stripped matrix. Differences indicate suppression or enhancement from proteins, lipids or other sample components. Dilution, spike recovery and sample-type comparison studies together characterise the effect before routine use.

Overview, 1 day · Intermediate
Immunology

Membrane Attack Complex Measurement Overview

The membrane attack complex, often measured as soluble terminal complement complex, reflects terminal pathway activation in plasma or fluids. Immunoassays for this marker are highly sensitive to collection and storage conditions. This overview explains general pre-analytical, analytical, and quality principles for specialist or approved research settings only.

Overview, half day · Advanced
Immunology

Mixed Lymphocyte Reaction Assay

The mixed lymphocyte reaction co-cultures responder lymphocytes with allogeneic stimulator cells to measure alloreactive proliferation. Stimulators are typically growth-arrested by a validated institutional method, while responders divide over several days. Proliferation dye or comparable readouts, syngeneic controls, and careful donor pairing are essential for meaningful comparison between combinations.

4-6 days · Advanced
Immunology

Monocyte Isolation by Adherence

Monocyte adherence isolation enriches monocytes from PBMC by allowing them to attach to tissue-culture plastic while non-adherent lymphocytes are washed away. It is inexpensive but yields variable purity and can partly activate cells. Gentle washing, defined culture time, and purity checking by morphology or flow markers are needed before downstream culture.

3-4 hours · Beginner
Immunology

Multiplex Assay Diluent Optimisation Overview

Multiplex assay diluent optimisation finds a sample dilution and buffer composition that recover all analytes accurately despite matrix effects in serum, plasma, or supernatant. Spike recovery, dilution linearity, and background are judged per analyte, not just on average. This overview gives a structured optimisation design for assay development and verification work.

Overview, 2-3 days · Advanced
Immunology

Myeloperoxidase Activity Assay

Myeloperoxidase activity assays estimate neutrophil enzyme content in tissue extracts or cell lysates through peroxidase-driven colour formation. Detergent extraction releases enzyme from granules, while blanks and standards anchor quantification. Because other peroxidases can contribute signal, sample preparation, inhibitors where validated, and protein normalisation determine how specifically activity reflects myeloperoxidase.

2-3 hours · Intermediate
Immunology

Myositis Panel Testing Overview

A myositis panel detects autoantibodies associated with inflammatory muscle diseases using line blot or related multiplex methods in referral laboratories. Antibody profiles may support, but never replace, clinical, imaging, and histological assessment. This overview describes general sample, control, and reporting principles at a non-diagnostic level.

Overview, 1 day · Advanced
Immunology

Natural Killer Cell Function Assay Overview

NK cell function assays measure degranulation or killing of susceptible targets to assess cytotoxic capacity in research or specialist immunology settings. Effector freshness, target health, and spontaneous death controls define the usable window. This overview outlines general workflow and interpretation principles, with human cell work under biosafety and ethics approvals.

Overview, 1 day · Advanced
Immunology

Nephelometry Calibration Overview

Nephelometry calibration establishes how scattered light from immune complexes converts to concentration using calibrators spanning the measuring range. Stable optics, clean cuvettes, and verified calibrator handling underpin reliable immunoglobulin and protein results. This overview describes calibration setup, acceptance checks, and recalibration triggers, distinct from routine sample measurement itself.

Overview, 2 hours · Intermediate
Immunology

Neuronal Antibody Testing Overview

Neuronal antibody testing identifies autoantibodies against neuronal surface or intracellular antigens using cell-based assays and tissue methods in reference laboratories. Sample type, timing, and clinical syndrome strongly influence usefulness. This overview summarises general workflow and quality principles at a high level for education, not for direct patient management.

Overview, 1 day · Advanced
Immunology

Neutrophil Antibody Testing Overview

Neutrophil antibody testing supports investigation of immune neutropenias in reference laboratories using granulocyte immunofluorescence or agglutination methods with freshly prepared donor cells. Cell freshness and panel breadth limit sensitivity. This overview covers general referral, cell preparation, and reading principles at a high level for approved specialist use.

Overview, 1-2 days · Advanced
Immunology

Neutrophil Isolation and Basic Functional Assays

Neutrophils are short-lived, easily activated granulocytes requiring rapid, gentle isolation and immediate functional testing. Density-based separation followed by red-cell removal yields cells for oxidative burst, degranulation, or migration assays. Keeping reagents endotoxin-low, avoiding cold shock, and working quickly preserves resting phenotype and responsiveness.

3-4 hours · Advanced
Immunology

NK Cell Expansion Basics in Culture

NK cell expansion grows natural killer cells from PBMC or enriched NK cells using cytokines and, in some systems, feeder support. Expansion rate and phenotype depend on starting material and culture conditions. Regular feeding, density control, and functional checks are needed throughout the culture period.

2-3 weeks · Advanced
Immunology

Opsonophagocytosis Assay Overview

Opsonophagocytosis assays test whether antibody and complement coating promotes uptake of particles or microbes by phagocytes. Fluorescent targets, defined opsonisation, and quenching or imaging to distinguish binding from internalisation underpin interpretation. Work involving live pathogens belongs only in approved containment with validated killing and disposal procedures.

3-5 hours · Advanced
Immunology

Osteoclast Differentiation Overview

Osteoclast differentiation cultures generate multinucleated bone-resorbing cells from monocyte or marrow precursors using defined survival and differentiation cytokines. Tartrate-resistant acid phosphatase staining, multinucleation counts, and resorption substrates confirm identity beyond morphology. This overview is for authorised cell work only and needs donor, species, and cytokine schedules fixed in a validated local protocol.

7-14 days · Advanced
Immunology

Oxidative Burst DHR Assay Overview

The dihydrorhodamine oxidative burst assay measures reactive oxygen production in stimulated neutrophils by flow cytometry in specialist immunology laboratories. Fresh blood, prompt stimulation, and paired unstimulated controls are essential because burst capacity fades quickly. This overview summarises general workflow principles for approved clinical or research contexts.

Overview, 2-3 hours · Advanced
Immunology

Parallelism Assessment for Immunoassays

Parallelism tests whether diluted endogenous samples produce dose-response curves parallel to the calibrator curve, indicating the assay measures the native analyte equivalently across dilutions. Non-parallel behaviour suggests matrix effects, cross-reacting species or a calibrator mismatch and limits confidence in reported concentrations for that sample type.

Overview, half day · Intermediate
Immunology

Paraneoplastic Antibody Testing Overview

Paraneoplastic antibody testing looks for immune markers linked to certain neurological syndromes in serum or cerebrospinal fluid within specialist referral pathways. Tissue-based screening and confirmatory blots are often combined. This overview outlines general handling, controls, and reporting principles, with all patient testing requiring neurology and institutional oversight.

Overview, 1-2 days · Advanced
Immunology

Paratope Characterisation Basics

The paratope is the antibody surface that contacts antigen, formed mainly by complementarity-determining regions. Characterising it through sequence review, binding comparison and targeted variant testing explains specificity and cross-reactivity. This overview introduces the concept and general study approaches without detailing engineering procedures.

Overview, planning study · Advanced
Immunology

PBMC Density Gradient Troubleshooting Guide

Gradient troubleshooting diagnoses poor PBMC yield, red cell contamination, or a diffuse interface after density separation. Most failures trace to temperature, dilution, braking, or layering technique. Checking each variable systematically restores a sharp mononuclear layer without changing the underlying standard method.

1-2 hours · Beginner
Immunology

PBMC Isolation by Density Gradient Centrifugation

Density gradient centrifugation separates peripheral blood mononuclear cells from red cells and granulocytes in anticoagulated blood. Gentle layering, brake-off centrifugation, and careful harvesting of the interface yield viable lymphocytes and monocytes for culture, freezing, or analysis. Processing blood promptly generally improves recovery, purity, and cell function.

1.5-2 hours · Beginner
Immunology

Peritoneal Lavage Cell Collection Overview

Peritoneal lavage recovers resident macrophages and other leukocytes from the peritoneal cavity in approved animal studies, or cells from clinical lavage fluid where governance applies. Sterile fluid instillation and recovery, gentle centrifugation, and differential counting characterise the population. All animal procedures require licensing, trained operators, and humane endpoints defined before work begins.

2-3 hours · Advanced
Immunology

Permeabilisation for Transcription Factor Staining

Transcription factor staining requires fixation and permeabilisation buffers that preserve nuclear epitopes while allowing antibody access. It is commonly combined with surface staining using fixation-resistant fluorophores. Buffer choice and staining in permeabilisation buffer are the main differences from cytokine staining workflows.

2-3 hours · Intermediate
Immunology

Phagocytosis Assay Using Labelled Particles

Phagocytosis assays measure uptake of labelled bacteria, beads, or apoptotic cells by macrophages and other phagocytes. Distinguishing internalised particles from surface-bound ones is the central challenge. Cold controls, cytochalasin controls, and quenching or imaging confirmation help ensure the signal reflects genuine engulfment rather than adhesion.

3-4 hours · Intermediate
Immunology

Phospho-Flow Basics for Signalling Responses

Phospho-flow measures phosphorylation of signalling proteins in single cells after brief stimulation and rapid fixation. It links surface phenotype to pathway activation without lysing the population. Precise stimulation timing, immediate fixation, and permeabilisation matched to the phospho-epitope are essential for quantitative results.

2-3 hours · Advanced
Immunology

Platelet Activation Assessment by Flow Cytometry Overview

Platelet activation by flow cytometry detects surface changes such as P-selectin exposure and activated integrin binding in diluted whole blood or platelet-rich plasma. Minimal manipulation is critical because collection itself activates platelets. Resting, agonist-stimulated, and inhibited controls define the window, and results depend heavily on standardised pre-analytical handling times.

2-3 hours · Intermediate
Immunology

Platelet Antibody Testing Overview

Platelet antibody testing investigates immune platelet refractoriness or neonatal conditions in reference immunohaematology laboratories using antigen capture or bead methods. Donor platelet selection and clinical urgency shape the wider pathway. This overview outlines general sample, panel, and reporting principles for education, with patient management led by transfusion specialists.

Overview, 1 day · Advanced
Immunology

Procalcitonin Assay Overview

Procalcitonin immunoassays measure a peptide precursor that typically rises in bacterial infection and systemic inflammation, supporting laboratory assessment alongside clinical findings. Automated platforms provide rapid quantitative results from serum or plasma. Sample timing, assay calibration and quality control determine reliability, and interpretation always requires clinical context.

Overview, 2-3 hours · Beginner
Immunology

Proficiency Testing for Immunoassays Overview

Proficiency testing sends blinded samples from an external provider to check laboratory accuracy against peers or reference values. Samples are handled exactly like routine specimens and results are returned by a deadline. Reviewing returns, investigating outliers and documenting corrective action close the quality loop.

Overview, half day per event · Beginner
Immunology

Quality Control of Cryopreserved Cells

Quality control of cryopreserved cells checks post-thaw viability, recovery, identity, and function against acceptance criteria before cells enter experiments. A small representative thaw can qualify a batch without consuming the bank. Consistent thawing, counting methods, and records reveal storage or freezing problems early and prevent failed assays using compromised material.

1-2 hours per thaw batch · Beginner
Immunology

QuantiFERON Sample Handling Overview

QuantiFERON sample handling covers correct tube filling, mixing, transport, incubation, and plasma harvesting for this interferon gamma release assay format. Each tube serves a distinct control or antigen role, so identity and timing errors invalidate results. This overview follows the manufacturer workflow at a general level for trained laboratory staff.

Overview, 1 day · Beginner
Immunology

Radial Immunodiffusion Overview

Radial immunodiffusion quantifies an antigen diffusing from a well into antibody-containing agar, forming a precipitin ring whose diameter relates to concentration. Standards on the same plate anchor measurement, and full diffusion must complete before reading. This overview covers plate preparation, well loading, measurement, and calculation for robust teaching and reference use.

2-3 days including diffusion · Beginner
Immunology

Rapid Antigen Test Quality Control Overview

Rapid antigen test quality control verifies that new lots, shipments, storage conditions, and operators produce expected results before patient testing continues. External positive and negative controls, acceptance logs, and lot quarantine rules prevent silent failures. This overview describes a practical QC rhythm for clinics, wards, and laboratory-managed testing sites.

Overview, 1 hour · Beginner
Immunology

Red Cell Lysis for Whole Blood Staining

Red cell lysis removes erythrocytes after antibody staining of whole blood so leukocytes can be analysed by flow cytometry. Stain-then-lyse preserves most surface epitopes and granulocytes. Lysis time and temperature must be controlled, because over-lysis damages leukocytes and under-lysis leaves interfering red cells.

30-45 minutes · Beginner
Immunology

Reference Interval Establishment Basics

A reference interval describes the central range of results expected in a defined healthy reference population for a given method. Establishing one requires careful donor selection, standardised collection and appropriate statistics. This overview covers planning, partitioning and verification at a general level for laboratory teams.

Overview, planning study · Intermediate
Immunology

Regulatory T Cell Suppression Assay Overview

Regulatory T cell suppression assays co-culture sorted regulatory cells with labelled responder T cells and stimulation to test whether proliferation is reduced. Responder division, viability, and regulatory-to-responder ratios shape interpretation. Because isolation and donor variability strongly influence results, this overview requires validated local procedures, controls, and ethics oversight.

3-5 days · Advanced
Immunology

Respiratory Burst Assay in Phagocytes

Respiratory burst assays measure reactive oxygen production by neutrophils or monocytes after stimulation, commonly using a fluorogenic substrate that becomes fluorescent when oxidised. Resting and strongly stimulated controls bracket the response. Prompt processing matters because phagocytes activate easily during isolation, raising background and masking stimulus-specific differences between samples.

2-3 hours · Intermediate
Immunology

Rheumatoid Factor Interference Overview

Rheumatoid factor, an anti-immunoglobulin antibody, can bridge assay antibodies and generate false positive signals, especially in sandwich and agglutination formats. Suspect it when results conflict with other evidence or fail to dilute linearly. This overview describes blocking, dilution, and alternative-format checks used to investigate rheumatoid factor interference systematically.

Overview, half day · Intermediate
Immunology

Sandwich ELISA for Soluble Antigen Quantification

Sandwich ELISA measures a soluble antigen captured between two specific antibodies and detected with an enzyme-linked reagent. With a serial standard curve, careful blocking, and consistent washing, it provides sensitive, quantitative results for cytokines, antibodies, and other proteins in serum, plasma, or culture supernatant samples.

2 days (including overnight coating) · Beginner
Immunology

Sepsis Biomarker Panel Overview

Sepsis biomarker panels combine markers such as procalcitonin, C-reactive protein and lactate-related measures to support laboratory assessment alongside clinical evaluation. No single marker diagnoses sepsis alone. This overview outlines panel components, sample requirements and reporting principles at a general level for laboratory awareness.

Overview, half day · Intermediate
Immunology

Seroconversion Panel Testing Overview

Seroconversion panels contain sequential samples collected as antibody develops after infection, letting laboratories compare how early different assays detect emerging reactivity. Panels are run blinded alongside routine controls. Earlier detection on a panel suggests better early sensitivity but must be interpreted with panel size and composition in mind.

Overview, 1 day · Intermediate
Immunology

Serology Assay Validation Overview

Serology assay validation establishes whether an antibody test is accurate, precise, and fit for its intended diagnostic or surveillance purpose. Panels of characterised positive, negative, and cross-reactive samples challenge every claim. This overview outlines planning, acceptance criteria, and documentation expected before a serology assay enters accredited routine use.

Overview, several weeks · Advanced
Immunology

Serum Amyloid Measurement Basics

Serum amyloid A is an acute-phase protein measured by immunoassay to follow inflammatory activity in research samples. Concentrations can span a wide range, so dilution planning and hook-effect awareness matter. Consistent sample handling and standard curve quality govern comparability across study visits.

2-3 hours · Beginner
Immunology

Serum Free Light Chain Assay Overview

Serum free light chain assays measure unbound kappa and lambda chains by immunoassay to support specialist evaluation of plasma cell disorders. Renal function, polyclonal inflammation, and assay method affect values and ratios. This overview describes general analytical and quality principles at a high level, with interpretation reserved for accredited clinical services.

Overview, half day · Intermediate
Immunology

Serum Protein Electrophoresis Interpretation Basics

Serum protein electrophoresis separates albumin and globulin fractions into characteristic patterns that trained staff review alongside quantitative immunoglobulins and clinical history. Pattern recognition, densitometry, and reflex testing follow strict laboratory algorithms. This overview introduces general fraction concepts and reporting workflow without teaching standalone diagnosis.

Overview, half day · Intermediate
Immunology

Spike Recovery Testing for Immunoassays

Spike recovery measures how accurately a known amount of analyte added to a sample matrix is recovered by the assay. Poor recovery reveals suppression or enhancement from matrix components. Spiked and unspiked aliquots are assayed together and recovery is calculated against the expected added concentration.

Overview, half day · Intermediate
Immunology

Spleen Single-Cell Preparation Overview

Spleen preparation converts intact splenic tissue into a single-cell suspension for flow cytometry or culture by gentle mechanical dissociation and red cell removal. Careful handling preserves lymphocyte viability and surface markers. Filtration, cold buffers, and prompt processing keep debris and clumping to a minimum.

45-60 minutes · Beginner
Immunology

Standard Curve Fitting for Immunoassays Overview

Standard curve fitting converts immunoassay signals into concentrations by modelling the standard response, commonly with weighted four- or five-parameter logistic models. Fit quality, anchor behaviour, and back-calculated standard recovery matter more than correlation alone. This overview covers model choice, weighting, acceptance checks, and safe handling of samples outside the curve.

Overview, 2 hours · Intermediate
Immunology

Sterility Practice for Flow Cytometric Sorting

Sterility practice for flow sorting protects cultured sorted cells from bacterial, fungal, and mycoplasma contamination introduced by sheath fluid, sample lines, and collection conditions. Aseptic preparation, system decontamination, sterile collection media, and post-sort monitoring are combined. Procedures must align with the sorter manufacturer guidance and institutional biosafety rules for the material sorted.

4-6 hours including preparation · Intermediate
Immunology

Surface Staining Workflow for Flow Cytometry

Surface staining labels extracellular markers on live cells before acquisition or fixation. A consistent workflow of counting, blocking, staining, and washing produces comparable data across samples. Temperature, antibody amount per test, and staining volume are standardised so populations resolve the same way in every run.

1-2 hours · Beginner
Immunology

Synovial Fluid Cell Preparation Overview

Synovial fluid cell preparation recovers leukocytes from viscous joint fluid for counting, cytology, or flow analysis while managing mucin clots and debris. Gentle dilution, validated viscosity reduction where approved, and prompt processing preserve cells. Clinical material must be handled under diagnostic governance, consent arrangements, and biosafety procedures defined by the institution.

2-3 hours · Intermediate
Immunology

T-Cell Activation and Expansion in Culture

Polyclonal T-cell activation through CD3 and CD28 stimulation drives proliferation and expansion for functional studies. Starting cell quality, stimulation strength, feeding schedule, and density control determine growth and phenotype. Regular counting and viability checks help maintain healthy cultures without overgrowth, exhaustion, or nutrient depletion.

7-14 days · Intermediate
Immunology

T-Cell ELISPOT Analysis and Spot Counting Guide

T-cell ELISPOT analysis converts developed plates into spot-forming units per million cells using consistent reader settings and pre-defined response criteria. Background subtraction, replicate agreement and positive-control performance decide whether a response is called. Locked counting parameters applied uniformly keep results comparable across plates and experiments.

Overview, 2-3 hours (analysis) · Intermediate
Immunology

T-SPOT Sample Handling Overview

T-SPOT sample handling covers blood collection, mononuclear cell isolation, counting, and timely plating for this ELISPOT-based interferon gamma release format. Cell yield, viability, and exact cells per well determine validity. This overview summarises the handling chain for trained staff, with counting and incubation performed strictly to the manufacturer workflow.

Overview, 1-2 days · Intermediate
Immunology

Tandem Dye Handling for Flow Cytometry

Tandem dyes transfer energy between donor and acceptor fluorophores and degrade with light, heat, and fixation, changing their emission signature. Consistent handling keeps compensation valid and staining reproducible. Protecting reagents, matching lots between controls and samples, and avoiding unnecessary fixation preserves tandem performance.

30 minutes (handling review) · Beginner
Immunology

Tetramer Staining Basics for Antigen-Specific T Cells

Tetramer staining detects T cells whose receptors bind a defined peptide-MHC complex, enabling direct enumeration without stimulation. Rare populations require bright tetramers, careful gating, and enough input events. Temperature, staining order, and dump channels strongly affect the ability to resolve small positive clusters.

2-3 hours · Advanced
Immunology

Thymocyte Preparation Overview

Thymocyte preparation releases developing T cells from thymic tissue by gentle disruption through a mesh, yielding a suspension dominated by immature thymocytes for phenotyping or culture. Tissue source may be animal or approved human material, each with distinct approvals. Cold handling and rapid staining preserve developmental subset distributions that change quickly after removal.

2-3 hours · Intermediate
Immunology

Thyroid Antibody Testing Overview

Thyroid antibody testing detects autoantibodies such as anti-thyroid peroxidase and anti-thyroglobulin by immunoassay to support evaluation of autoimmune thyroid disease. Results are interpreted with thyroid function tests and clinical findings, not in isolation. Assay calibration, cut-off verification and consistent reporting conventions underpin reliable serology.

Overview, 2-3 hours · Beginner
Immunology

Tonsil Cell Preparation Overview

Tonsil cell preparation releases lymphocytes and other immune cells from surgically removed tonsil tissue by gentle mechanical disruption and filtration. The tissue is clinical waste unless transferred under explicit approval, so governance precedes technique. Rapid cold processing, red cell and debris management, and viability assessment produce suspensions suited to phenotyping or culture.

3-4 hours · Intermediate
Immunology

Transplant Monitoring Overview

Transplant monitoring tracks graft function, immunosuppressant exposure, infection risk, and rejection markers after organ or stem cell transplantation. This overview covers scheduled sampling, assay coordination, and result communication at a general level. All interpretation and management decisions belong to the transplant team under institutional and regulatory governance.

Overview, longitudinal · Advanced
Immunology

Troponin Immunoassay Overview

Cardiac troponin immunoassays measure troponin I or T released after myocardial injury on high-sensitivity automated platforms. Serial sampling, assay-specific decision limits and attention to interferences underpin laboratory reporting. This overview describes laboratory workflow principles only and does not replace chest-pain pathways or clinical judgement.

Overview, 2-3 hours · Intermediate
Immunology

Turbidimetry Basics Overview

Turbidimetry estimates immune complex formation by the fall in transmitted light through a reaction mixture, read as absorbance change on chemistry analysers. Reaction timing, blank correction, and particle growth conditions determine the signal. This overview explains the measurement principle, run setup, and routine checks that keep turbidimetric protein assays consistent.

Overview, 1 hour · Beginner
Immunology

Vaccine Antibody Avidity Assay Overview

Antibody avidity assays estimate binding strength maturation after vaccination or infection by comparing immunoassay signals with and without a chaotropic wash. Paired conditions on the same plate and consistent chaotrope timing are essential for a meaningful avidity index. This overview explains general design and quality principles for approved research or specialist evaluation.

Overview, half day · Intermediate
Immunology

Vaccine Response ELISA Overview

Vaccine response ELISA quantifies antigen-specific antibodies in serum collected before and after immunisation in a research study. Paired timing, a shared standard, and consistent dilution allow fold-change comparisons. Samples from the same participant should be tested together to minimise inter-plate variation.

1-2 days · Intermediate
Immunology

Vasculitis Antibody Testing Overview

Vasculitis antibody testing centres on antineutrophil cytoplasmic antibodies and related specificities measured by immunofluorescence and antigen-specific assays in specialist laboratories. Method combination and clinical presentation shape interpretation. This general overview covers ordering awareness, sample handling, quality controls, and reporting principles without setting diagnostic cut-offs.

Overview, half day · Advanced
Immunology

Virtual Crossmatch Assessment Overview

A virtual crossmatch predicts crossmatch outcome by comparing a recipient antibody profile with a donor HLA type, without mixing cells, inside accredited transplant programmes. Current antibody data, complete donor typing, and centre risk rules are prerequisites. This overview describes general assessment workflow and documentation principles rather than organ allocation decisions.

Overview, 2-3 hours · Advanced
Immunology

Western Blot for Immune Signalling Proteins

Western blotting detects total and phosphorylated signalling proteins in immune cell lysates after stimulation. Rapid lysis with phosphatase and protease inhibitors preserves modification states. Equal loading, validated antibodies, and appropriate exposure allow meaningful comparison of pathway activation between resting, stimulated, and inhibitor-treated conditions over time.

2 days · Intermediate
Immunology

Whole Blood Staining for Flow Cytometry

Whole blood staining labels leukocyte surface markers directly in blood before red cell lysis, minimising manipulation and preserving granulocyte populations. It suits immunophenotyping where processing losses must be avoided. Accurate blood volumes, timely processing, and complete lysis are the main quality determinants.

1 hour · Beginner