Journal Watch · Science Advances · 2026

Sub-4-nm Pt<sub>4</sub>FeCoNiCu HEI nanocrystals via borophene-mediated co-anchoring for efficient and durable electrocatalysis.

This work demonstrates a general strategy to overcome the activity-durability trade-off in multicomponent intermetallic catalysts through strong metal-support interactions.

Zeng X, Fang Z, Tian J et al.Science Advances3 min readPharma relevance 40/100

DOI: 10.1126/sciadv.aeg1088PMID: 42696574Study type: research study

TL;DR

This work demonstrates a general strategy to overcome the activity-durability trade-off in multicomponent intermetallic catalysts through strong metal-support interactions.

Key findings

  • Owing to the high-entropy stabilization effect and the robust borophene co-anchoring effect, the catalyst retains 72% of its peak power density and 80% of its initial mass activity after 30,000 durability cycles.
  • Moreover, the borophene interlayer mitigates Pt-catalyzed carbon corrosion, as verified by a 5000 startup/shutdown cycling test and online mass spectrometry.
  • This work demonstrates a general strategy to overcome the activity-durability trade-off in multicomponent intermetallic catalysts through strong metal-support interactions.

Numbers at a glance (from the abstract)

72%80%

Every figure above is taken verbatim from the abstract below. Check the full text for denominators, confidence intervals and subgroup detail.

What they did

The strong metal-borophene interaction suppresses particle sintering during high temperature annealing (1000°C) and enables a high metal loading of 36 wt % at a small particle size. The resulting L1<sub>0</sub>-ordered structure with a unique FeCoNiCu atomic stacking configuration is confirmed by electron microscopy and x-ray absorption spectroscopy. The catalyst achieves an exceptional H<sub>2</sub>-air fuel cell peak power density of 1.055 watts per square centimeter and an ORR mass activity of 1.4 amperes per milligram of Pt at 0.9 volts in H<sub>2</sub>-O<sub>2</sub> fuel cells.

Full abstract (original)

Background: Pt-based intermetallic compounds with atomically ordered arrangements are highly promising catalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. However, the mutual constraint between high-temperature ordering and small-size stability (especially at high metal loadings), as well as the corrosion of both metal particles and carbon supports under operating conditions, severely limit their mass activity and long-term durability. Here, we report a borophene-mediated multimetal site co-anchoring strategy to synthesize sub-4-nanometer high-entropy Pt<sub>4</sub>FeCoNiCu intermetallic catalysts (MMCA-HEIMCs) supported on pristine carbon, which enables simultaneous anchoring of Pt and non-noble metals onto the carbon support.

What they did: The strong metal-borophene interaction suppresses particle sintering during high temperature annealing (1000°C) and enables a high metal loading of 36 wt % at a small particle size. The resulting L1<sub>0</sub>-ordered structure with a unique FeCoNiCu atomic stacking configuration is confirmed by electron microscopy and x-ray absorption spectroscopy. The catalyst achieves an exceptional H<sub>2</sub>-air fuel cell peak power density of 1.055 watts per square centimeter and an ORR mass activity of 1.4 amperes per milligram of Pt at 0.9 volts in H<sub>2</sub>-O<sub>2</sub> fuel cells.

Results & conclusions: Owing to the high-entropy stabilization effect and the robust borophene co-anchoring effect, the catalyst retains 72% of its peak power density and 80% of its initial mass activity after 30,000 durability cycles. Moreover, the borophene interlayer mitigates Pt-catalyzed carbon corrosion, as verified by a 5000 startup/shutdown cycling test and online mass spectrometry. This work demonstrates a general strategy to overcome the activity-durability trade-off in multicomponent intermetallic catalysts through strong metal-support interactions.

Abstract © the authors / Science Advances (2026). Reproduced here for discussion and indexing, with attribution. Read the original at https://doi.org/10.1126/sciadv.aeg1088 · PubMed 42696574.

Why it matters for pharma & biotech

  • Relevant to General & Medicine teams tracking Science Advances for new targets, mechanisms and biomarkers.
  • As earlier-stage work, its near-term value is target validation and assay design rather than clinical decisions.
  • For searchers: the full abstract is reproduced below, so you can judge relevance before opening the publisher page.

Limitations & what to check in the full text

  • This brief is based on the published abstract only. Effect sizes, subgroup results and safety detail in the full text may qualify the headline findings.

Frequently asked questions

What did this Science Advances study find?

This work demonstrates a general strategy to overcome the activity-durability trade-off in multicomponent intermetallic catalysts through strong metal-support interactions.

What type of study is this?

It is a research study, published in Science Advances in 2026. The strong metal-borophene interaction suppresses particle sintering during high temperature annealing (1000°C) and enables a high metal loading of 36 wt % at a small particle size.

Where can I read the original paper?

The original is at the publisher via DOI 10.1126/sciadv.aeg1088. PubMed ID: 42696574. BioStudioAI reproduces the abstract for discussion and links to the source.

How to cite the original: Zeng X, Fang Z, Tian J et al.. Sub-4-nm Pt&lt;sub&gt;4&lt;/sub&gt;FeCoNiCu HEI nanocrystals via borophene-mediated co-anchoring for efficient and durable electrocatalysis.. Science Advances (2026). DOI: 10.1126/sciadv.aeg1088.
This brief: BioStudioAI Journal Watch, 29 October 2026. https://biostudioai.com/blog/papers/sub-4-nm-pt-lt-sub-gt-4-lt-sub-gt-feconicu-hei-nanocrystals-via-borophen-eg1088/

Reading papers is step one. Analysing the data is the work.

BioStudioAI turns raw lab files into QC'd results, statistics, figures, reports and slides — hosted on your servers, every number computed, nothing typed.

Open BioStudioAI More guides