Journal Watch · Nature Communications · 2026
Stabilizing 1.93-eV ultrawide-bandgap perovskites for efficient triple-junction solar cells.
Notably, the encapsulated devices retained 96% of their initial performance after 1500 hours of continuous maximum power point tracking under one-sun illumination in ambient conditions, representing the notable stability in perovskite/perovskite/silicon triple-junction cells reported to date.
TL;DR
Notably, the encapsulated devices retained 96% of their initial performance after 1500 hours of continuous maximum power point tracking under one-sun illumination in ambient conditions, representing the notable stability in perovskite/perovskite/silicon triple-junction cells reported to date.
Key findings
- Notably, the encapsulated devices retained 96% of their initial performance after 1500 hours of continuous maximum power point tracking under one-sun illumination in ambient conditions, representing the notable stability in perovskite/perovskite/silicon triple-junction cells reported to date.
Numbers at a glance (from the abstract)
Every figure above is taken verbatim from the abstract below. Check the full text for denominators, confidence intervals and subgroup detail.
What they did
Here, we introduce 1,4-phenylenediamine dihydriodide into the 1.93-eV bandgap perovskite, which significantly increases the ion migration barrier and suppresses phase segregation through strong interactions with the perovskite lattice. Combined with a post-treatment using 3-(methylthio)propylamine hydroiodide to modify the perovskite surface, we achieved a certified efficiency of 26.18% for the triple-junction solar cell, with an impressive open-circuit voltage of 3.148 V on an aperture area of 1.17 cm².
Full abstract (original)
Background: Monolithic perovskite/perovskite/silicon triple-junction solar cells offer higher theoretical efficiency than their two-junction counterparts. However, the phase instability of ultrawide-bandgap perovskites remains a major obstacle to further improve the efficiency and stability of triple-junction devices.
What they did: Here, we introduce 1,4-phenylenediamine dihydriodide into the 1.93-eV bandgap perovskite, which significantly increases the ion migration barrier and suppresses phase segregation through strong interactions with the perovskite lattice. Combined with a post-treatment using 3-(methylthio)propylamine hydroiodide to modify the perovskite surface, we achieved a certified efficiency of 26.18% for the triple-junction solar cell, with an impressive open-circuit voltage of 3.148 V on an aperture area of 1.17 cm².
Results & conclusions: Notably, the encapsulated devices retained 96% of their initial performance after 1500 hours of continuous maximum power point tracking under one-sun illumination in ambient conditions, representing the notable stability in perovskite/perovskite/silicon triple-junction cells reported to date.
Abstract © the authors / Nature Communications (2026). Reproduced here for discussion and indexing, with attribution. Read the original at https://doi.org/10.1038/s41467-026-75305-0 · PubMed 42431888.
Why it matters for pharma & biotech
- Relevant to General & Medicine teams tracking Nature Communications for new targets, mechanisms and biomarkers.
- As earlier-stage work, its near-term value is target validation and assay design rather than clinical decisions.
- For searchers: the full abstract is reproduced below, so you can judge relevance before opening the publisher page.
Limitations & what to check in the full text
- This brief is based on the published abstract only. Effect sizes, subgroup results and safety detail in the full text may qualify the headline findings.
Frequently asked questions
What did this Nature Communications study find?
Notably, the encapsulated devices retained 96% of their initial performance after 1500 hours of continuous maximum power point tracking under one-sun illumination in ambient conditions, representing the notable stability in perovskite/perovskite/silicon triple-junction cells reported to date.
What type of study is this?
It is a research study, published in Nature Communications in 2026. Here, we introduce 1,4-phenylenediamine dihydriodide into the 1.93-eV bandgap perovskite, which significantly increases the ion migration barrier and suppresses phase segregation through strong interactions with the perovskite lattice.
Where can I read the original paper?
The original is at the publisher via DOI 10.1038/s41467-026-75305-0. PubMed ID: 42431888. BioStudioAI reproduces the abstract for discussion and links to the source.
This brief: BioStudioAI Journal Watch, 29 October 2026. https://biostudioai.com/blog/papers/stabilizing-1-93-ev-ultrawide-bandgap-perovskites-for-efficient-triple-j-753050/
Reading papers is step one. Analysing the data is the work.
BioStudioAI turns raw lab files into QC'd results, statistics, figures, reports and slides — hosted on your servers, every number computed, nothing typed.
Open BioStudioAI More guides