Journal Watch · Nature Communications · 2026

Lithographic patterning of conformal thin films on 3D structures using Scaffold-architected Lift-off masks.

Our approach opens opportunities for manufacturing complex 3D structures at the micro- and nanoscale by enabling lithographic patterning on the exterior surfaces of arbitrary 3D structures.

Liu X, Che Z, Maj Z et al.Nature Communications3 min readPharma relevance 40/100

DOI: 10.1038/s41467-026-75538-zPMID: 42448711Study type: research study

TL;DR

Our approach opens opportunities for manufacturing complex 3D structures at the micro- and nanoscale by enabling lithographic patterning on the exterior surfaces of arbitrary 3D structures.

Key findings

  • It is agnostic to the used thin-film deposition process and enables even lift-off patterning of atomic layer deposited (ALD) conformal coatings, a task infeasible for conventional shadowing-based lift-off processes.
  • Our approach opens opportunities for manufacturing complex 3D structures at the micro- and nanoscale by enabling lithographic patterning on the exterior surfaces of arbitrary 3D structures.

What they did

Here we present a robust approach for patterning of conformal thin-film coatings on complex 3D structures, including on sloped surfaces with angles up to 90°, with multiscale dimensions from 100 μm to 100 nm, and even down to the sub-30 nm scale when mask shrinkage techniques are used. This patterning approach utilizes a lithographically defined 3D Scaffold-Architected Lift-Off (SALO) mask in the lift-off process.

Full abstract (original)

Background: Micro- and nanoscale patterning of conformal thin-film coatings on the exterior surfaces of complex three-dimensional (3D) structures is essential for emerging applications such as soft robotics, photonics, and functional 3D-printed MEMS devices. However, existing methods struggle to deliver high-resolution patterning on complex 3D structures and often suffer from poor thickness control, and inadequate surface conformity of the thin-film coatings.

What they did: Here we present a robust approach for patterning of conformal thin-film coatings on complex 3D structures, including on sloped surfaces with angles up to 90°, with multiscale dimensions from 100 μm to 100 nm, and even down to the sub-30 nm scale when mask shrinkage techniques are used. This patterning approach utilizes a lithographically defined 3D Scaffold-Architected Lift-Off (SALO) mask in the lift-off process.

Results & conclusions: It is agnostic to the used thin-film deposition process and enables even lift-off patterning of atomic layer deposited (ALD) conformal coatings, a task infeasible for conventional shadowing-based lift-off processes. Our approach opens opportunities for manufacturing complex 3D structures at the micro- and nanoscale by enabling lithographic patterning on the exterior surfaces of arbitrary 3D structures.

Abstract © the authors / Nature Communications (2026). Reproduced here for discussion and indexing, with attribution. Read the original at https://doi.org/10.1038/s41467-026-75538-z · PubMed 42448711.

Why it matters for pharma & biotech

  • Relevant to General & Medicine teams tracking Nature Communications for new targets, mechanisms and biomarkers.
  • As earlier-stage work, its near-term value is target validation and assay design rather than clinical decisions.
  • For searchers: the full abstract is reproduced below, so you can judge relevance before opening the publisher page.

Limitations & what to check in the full text

  • This brief is based on the published abstract only. Effect sizes, subgroup results and safety detail in the full text may qualify the headline findings.
  • The abstract reports its conclusions qualitatively, without headline effect sizes — read the full text before citing a magnitude.

Frequently asked questions

What did this Nature Communications study find?

Our approach opens opportunities for manufacturing complex 3D structures at the micro- and nanoscale by enabling lithographic patterning on the exterior surfaces of arbitrary 3D structures.

What type of study is this?

It is a research study, published in Nature Communications in 2026. Here we present a robust approach for patterning of conformal thin-film coatings on complex 3D structures, including on sloped surfaces with angles up to 90°, with multiscale dimensions from 100 μm to 100 nm, and even down to the sub-30 nm scale when mask shrinkage techniques are used.

Where can I read the original paper?

The original is at the publisher via DOI 10.1038/s41467-026-75538-z. PubMed ID: 42448711. BioStudioAI reproduces the abstract for discussion and links to the source.

How to cite the original: Liu X, Che Z, Maj Z et al.. Lithographic patterning of conformal thin films on 3D structures using Scaffold-architected Lift-off masks.. Nature Communications (2026). DOI: 10.1038/s41467-026-75538-z.
This brief: BioStudioAI Journal Watch, 29 October 2026. https://biostudioai.com/blog/papers/lithographic-patterning-of-conformal-thin-films-on-3d-structures-using-s-75538z/

Reading papers is step one. Analysing the data is the work.

BioStudioAI turns raw lab files into QC'd results, statistics, figures, reports and slides — hosted on your servers, every number computed, nothing typed.

Open BioStudioAI More guides