Journal Watch · ACS Nano · 2026
Lattice Strain in Au<sub>3</sub>Cu Facilitated Hydrogen Spillover for Efficient Nitrate Electroreduction to Ammonia.
Integrating the NO<sub>3</sub>RR catalyst into a Zn-NO<sub>3</sub><sup>-</sup> battery as the cathode achieves a power density of 5.91 mW cm<sup>-2</sup> and FE of 90.5% for NH<sub>3</sub> production, highlighting the potential for energy-efficient nitrate-to-ammonia conversion.
TL;DR
Integrating the NO<sub>3</sub>RR catalyst into a Zn-NO<sub>3</sub><sup>-</sup> battery as the cathode achieves a power density of 5.91 mW cm<sup>-2</sup> and FE of 90.5% for NH<sub>3</sub> production, highlighting the potential for energy-efficient nitrate-to-ammonia conversion.
Key findings
- These integrated effects collectively lower the energy barrier (0.12 eV) for forming the key reaction intermediate *NHO during the rate-determining step, boosting the overall NO<sub>3</sub>RR kinetics.
- Integrating the NO<sub>3</sub>RR catalyst into a Zn-NO<sub>3</sub><sup>-</sup> battery as the cathode achieves a power density of 5.91 mW cm<sup>-2</sup> and FE of 90.5% for NH<sub>3</sub> production, highlighting the potential for energy-efficient nitrate-to-ammonia conversion.
Numbers at a glance (from the abstract)
Every figure above is taken verbatim from the abstract below. Check the full text for denominators, confidence intervals and subgroup detail.
What they did
In situ experiments confirm that the strained Au<sub>3</sub>Cu promotes water dissociation under alkaline conditions, ensuring enhanced *H surface coverage to support efficient hydrogenation. Density functional theory (DFT) calculations further demonstrate the strain-induced upward shift of the d-band center strengthens NO<sub>3</sub><sup>-</sup> adsorption and activation. More critically, the compressive strain within the Au<sub>3</sub>Cu shell drastically contracts Au-Cu interatomic distances, which achieves a substantial reduction in the energy barrier for hydrogen spillover from Au to Cu sites.
Full abstract (original)
Background: Cu-based nanocatalysts have been widely studied for the electrochemical nitrate reduction reaction (NO<sub>3</sub>RR) to ammonia, yet their activity and selectivity remain limited. Herein, we demonstrate that lattice-strained Au<sub>3</sub>Cu, achieved by organizing Cu@Au<sub>3</sub>Cu core-shell nanocrystals (NCs), facilitates efficient high-concentration nitrate electroreduction to ammonia. Typically, an NH<sub>3</sub> yield rate of 265.2 mg h<sup>-1</sup> mg<sub>cat</sub><sup>-1</sup> is achieved, which is superb among reported Cu-Au catalysts.
What they did: In situ experiments confirm that the strained Au<sub>3</sub>Cu promotes water dissociation under alkaline conditions, ensuring enhanced *H surface coverage to support efficient hydrogenation. Density functional theory (DFT) calculations further demonstrate the strain-induced upward shift of the d-band center strengthens NO<sub>3</sub><sup>-</sup> adsorption and activation. More critically, the compressive strain within the Au<sub>3</sub>Cu shell drastically contracts Au-Cu interatomic distances, which achieves a substantial reduction in the energy barrier for hydrogen spillover from Au to Cu sites.
Results & conclusions: These integrated effects collectively lower the energy barrier (0.12 eV) for forming the key reaction intermediate *NHO during the rate-determining step, boosting the overall NO<sub>3</sub>RR kinetics. Integrating the NO<sub>3</sub>RR catalyst into a Zn-NO<sub>3</sub><sup>-</sup> battery as the cathode achieves a power density of 5.91 mW cm<sup>-2</sup> and FE of 90.5% for NH<sub>3</sub> production, highlighting the potential for energy-efficient nitrate-to-ammonia conversion.
Abstract © the authors / ACS Nano (2026). Reproduced here for discussion and indexing, with attribution. Read the original at https://doi.org/10.1021/acsnano.6c04373 · PubMed 42175968.
Why it matters for pharma & biotech
- Relevant to Biotechnology & Methods teams tracking ACS Nano for new targets, mechanisms and biomarkers.
- As earlier-stage work, its near-term value is target validation and assay design rather than clinical decisions.
- For searchers: the full abstract is reproduced below, so you can judge relevance before opening the publisher page.
Limitations & what to check in the full text
- This brief is based on the published abstract only. Effect sizes, subgroup results and safety detail in the full text may qualify the headline findings.
Frequently asked questions
What did this ACS Nano study find?
Integrating the NO<sub>3</sub>RR catalyst into a Zn-NO<sub>3</sub><sup>-</sup> battery as the cathode achieves a power density of 5.91 mW cm<sup>-2</sup> and FE of 90.5% for NH<sub>3</sub> production, highlighting the potential for energy-efficient nitrate-to-ammonia conversion.
What type of study is this?
It is a research study, published in ACS Nano in 2026. In situ experiments confirm that the strained Au<sub>3</sub>Cu promotes water dissociation under alkaline conditions, ensuring enhanced *H surface coverage to support efficient hydrogenation.
Where can I read the original paper?
The original is at the publisher via DOI 10.1021/acsnano.6c04373. PubMed ID: 42175968. BioStudioAI reproduces the abstract for discussion and links to the source.
This brief: BioStudioAI Journal Watch, 29 October 2026. https://biostudioai.com/blog/papers/lattice-strain-in-au-lt-sub-gt-3-lt-sub-gt-cu-facilitated-hydrogen-spill-c04373/
Reading papers is step one. Analysing the data is the work.
BioStudioAI turns raw lab files into QC'd results, statistics, figures, reports and slides — hosted on your servers, every number computed, nothing typed.
Open BioStudioAI More guides